Tegheim - Home made 4 rotor Wolvo 142

Tegheim · 08-20-2012, 11:11 AM

This weekend I made some of my brackets for suspension. It dropped suddenly and has gone very well. Starting to agree with the TIG-welder, and begin to realize that TIG is for us who can not MIG / MAG

It is slow and calm

Then weld all as much as possible before it is installed in the car to where also welded into the frame.
The sole purpose of avoiding weld so much in uncomfortable positions

Then the most important today

I was to pick my crank! Finally!
Now it's just for me to continue with splines etc.. Let the pictures speak for themselves

Isn't she beautiful??

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

08-20-2012, 11:11 AM	#11
Tegheim Rotary Fanatic Join Date: Feb 2011 Posts: 210 Rep Power: 15	This weekend I made some of my brackets for suspension. It dropped suddenly and has gone very well. Starting to agree with the TIG-welder, and begin to realize that TIG is for us who can not MIG / MAG It is slow and calm Then weld all as much as possible before it is installed in the car to where also welded into the frame. The sole purpose of avoiding weld so much in uncomfortable positions Then the most important today I was to pick my crank! Finally! Now it's just for me to continue with splines etc.. Let the pictures speak for themselves Isn't she beautiful??