my 73 RX2 Deuce RUSToration

banzaitoyota · 12-16-2012, 08:42 PM

Worked on rehabbing the exhaust system. RB header thru 2 RB presilencers, merges into a dual other RB muffler. It was poorly mounted when I got the car back in 2006. I decided it was time to fix the scraping and rattling driving down the road. Here is the RB muffler mocked into it's new position. I plan on reworking the valance opening for better aesthetics.

New mounts will have to be fabricated.

The pipes from the presilencers were poorly laid out. I was able to do the first bend in the harbor freight Bender, but the second bend wouldn't fit in the Bender, so I will have to do a pie cut to rotate the flange back to a vertical . Here is a pic before the pie cuts.

Eventually mandrel bends will be used to make new pipes

12-16-2012, 08:42 PM	#8
banzaitoyota Rotary Fanatic Join Date: Feb 2008 Posts: 201 Rep Power: 18	Worked on rehabbing the exhaust system. RB header thru 2 RB presilencers, merges into a dual other RB muffler. It was poorly mounted when I got the car back in 2006. I decided it was time to fix the scraping and rattling driving down the road. Here is the RB muffler mocked into it's new position. I plan on reworking the valance opening for better aesthetics. New mounts will have to be fabricated. The pipes from the presilencers were poorly laid out. I was able to do the first bend in the harbor freight Bender, but the second bend wouldn't fit in the Bender, so I will have to do a pie cut to rotate the flange back to a vertical . Here is a pic before the pie cuts. Eventually mandrel bends will be used to make new pipes __________________ My deuce

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode