The Unofficially Official: To-Do List Thread DGRR 2013 Edition - Page 4

djmtsu · 03-23-2013, 01:36 PM

Got new tires. So that's done.

Redhawkjrt · 03-23-2013, 09:51 PM

1. Install Mazdaspeed exhaust
2. Install clear corners
3. Install super secret, ultra stealth modification
4. Wash, wax, detail

GySgtFrank · 03-26-2013, 09:58 PM

Quote:

Originally Posted by Redhawkjrt

1. Install Mazdaspeed exhaust
2. Install clear corners
3. Install super secret, ultra stealth modification
4. Wash, wax, detail

Hey! Super Secret Ultra Stealth Modifications are not fair! : pout :

Quote:

Originally Posted by muibubbles

This is going to be a fun 3 weeks.......

You're an even bigger masochist than I am.

muibubbles · 03-26-2013, 08:52 PM

ohhh what a fun thread.. ill bite...

Interior
Fabricate
-dash
-floor pans
-trans tunnel
-pass side seat rail/install recaro seat
paint/powdercoat roll bar
paint interior
oh i should also probably make myself a set of door panels..

Engine bay
respray
-re powdercoat everything
engine bay cover
oil cooler
swap oil feed line to turbo
new VMIC? (may put on hold until i modify new front bumper)

Exterior
Fabricate
-Front fenders/make mold, cast new fenders (nightmare)
-Rear over fenders
Side skirts/ vents/ canards
Spoiler
new decals for rims
roof rack
cargo box
paint car????..............

along with some other rubbish..
This is going to be a fun 3 weeks.......

***TitaniumTT*** · 03-26-2013, 10:26 PM

Speaking of.... off the interwebs and back into the garage for you!!!!! I wanna see this FB damnit (and I can't believe I just said that) as I'm quite impressed with the work done so far....

List for the 8 hasn't changed...

Finish Exhaust
Finish stereo
Adjust rearview Camer
Auto-Close sunroof
ReTint the entire car... this entails dropping it off and opening my wallet... I don't have the patience for that
Plugs, wires, clean air filter
Replace OMP
Change oil
And detailing it

List for the Jeep
Install Battery
Change Oil

I <3 my Mopars

88turboii · 03-27-2013, 07:55 AM

1. make downpipe
2. paint wheels
3. replace stereo
4. change oil

muibubbles · 03-27-2013, 11:05 PM

slowlyyyyyyyyyyyyyyyyyyyyyyyy getting there.

11:46pm, off to do body work on the fenders..

Sephitrask · 03-30-2013, 10:20 PM

Clutch is done, now 750 mile of lame ass driving... I hate break in time..... Now to fix the exhaust, and change oil the day before and we are good!

Pete_89T2 · 03-31-2013, 08:12 AM

Only thing left for me to do now is a complete detailing job just before I leave. Other than fixing a leaky trans output shaft seal, I didn't have any projects going on the FC this winter.

Yesterday I finished all of my usual "pre-DGRR inspections & preventive maintenance checklist" items. Dropped in a set of fresh plugs and did an oil & filter change, so the FC is ready to roll.

2gslse · 03-31-2013, 09:35 AM

Gotta pick the FB up this week but will be doing maint on the FD just in case its needed to go again.

muibubbles · 04-03-2013, 11:59 PM

THIS is suppose to be ready in 2 weeks. my gawd.

BEGINNING TO FREAK OUT.

reddozen · 04-10-2013, 09:14 PM

I daily the bridge... no choice.

djmtsu · 04-10-2013, 09:16 PM

Quote:

Originally Posted by reddozen

I daily the bridge... no choice.

You have a choice!

Choose to find a shitbox. I keep finding them and selling them, or giving them to family members. Lol.

The Camry will stay though, it is a legacy car.

reddozen · 04-10-2013, 10:46 PM

my money is reserved for the new 7 or whatever they call it. 4 years to go....

djmtsu · 04-11-2013, 07:12 AM

Quote:

Originally Posted by reddozen

my money is reserved for the new 7 or whatever they call it. 4 years to go....

What about the FC languishing in your garage

03-23-2013, 01:36 PM	#1
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Got new tires. So that's done. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

03-23-2013, 09:51 PM	#2
Redhawkjrt Brake, Turn, Go! Repeat. Join Date: Feb 2009 Location: Springfield, Il. Posts: 114 Rep Power: 17	1. Install Mazdaspeed exhaust 2. Install clear corners 3. Install super secret, ultra stealth modification 4. Wash, wax, detail __________________ Redhawk

03-26-2013, 08:52 PM	#4
muibubbles Bubble Tech Join Date: Oct 2008 Posts: 161 Rep Power: 18	ohhh what a fun thread.. ill bite... Interior Fabricate -dash -floor pans -trans tunnel -pass side seat rail/install recaro seat paint/powdercoat roll bar paint interior oh i should also probably make myself a set of door panels.. Engine bay respray -re powdercoat everything engine bay cover oil cooler swap oil feed line to turbo new VMIC? (may put on hold until i modify new front bumper) Exterior Fabricate -Front fenders/make mold, cast new fenders (nightmare) -Rear over fenders Side skirts/ vents/ canards Spoiler new decals for rims roof rack cargo box paint car????.............. along with some other rubbish.. This is going to be a fun 3 weeks....... __________________ Bubble Tech www.BubbleTech.us

03-26-2013, 10:26 PM	#5
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Speaking of.... off the interwebs and back into the garage for you!!!!! I wanna see this FB damnit (and I can't believe I just said that) as I'm quite impressed with the work done so far.... List for the 8 hasn't changed... Finish Exhaust Finish stereo Adjust rearview Camer Auto-Close sunroof ReTint the entire car... this entails dropping it off and opening my wallet... I don't have the patience for that Plugs, wires, clean air filter Replace OMP Change oil And detailing it List for the Jeep Install Battery Change Oil I <3 my Mopars __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

03-27-2013, 07:55 AM	#6
88turboii destroy, rebuild, repeat Join Date: Feb 2008 Location: Charleston, SC Posts: 395 Rep Power: 18	1. make downpipe 2. paint wheels 3. replace stereo 4. change oil __________________ 1993 RX-7 Touring MB, stockport 13B-REW, 9.4CR rotors, T04S 60-1/p-trim single turbo 1986 RX-7 Base project track beast

03-27-2013, 11:05 PM	#7
muibubbles Bubble Tech Join Date: Oct 2008 Posts: 161 Rep Power: 18	slowlyyyyyyyyyyyyyyyyyyyyyyyy getting there. 11:46pm, off to do body work on the fenders.. __________________ Bubble Tech www.BubbleTech.us

03-30-2013, 10:20 PM	#8
Sephitrask BOILED PEANUTS!!! Join Date: Jun 2010 Location: Jacksonville, Fl Posts: 257 Rep Power: 16	Clutch is done, now 750 mile of lame ass driving... I hate break in time..... Now to fix the exhaust, and change oil the day before and we are good! __________________ www.rotarycarclub.com *"The way a Rotary engine makes power is ferocious, much like having a chainsaw under your right foot."*

03-31-2013, 08:12 AM	#9
Pete_89T2 Lifetime Rotorhead Join Date: Apr 2010 Location: Elkton, MD Posts: 874 Rep Power: 16	Only thing left for me to do now is a complete detailing job just before I leave. Other than fixing a leaky trans output shaft seal, I didn't have any projects going on the FC this winter. Yesterday I finished all of my usual "pre-DGRR inspections & preventive maintenance checklist" items. Dropped in a set of fresh plugs and did an oil & filter change, so the FC is ready to roll.

03-31-2013, 09:35 AM	#10
2gslse Rotary Fanatic Join Date: Apr 2008 Location: front royal va Posts: 440 Rep Power: 18	Gotta pick the FB up this week but will be doing maint on the FD just in case its needed to go again. __________________ ____________________________________________ 1976 Cosmo needing lots of work 1993 Rx-7 410 RWHP single turbo toy 1985 Rx-7 toy/project car 411HP stoplight terror 2001 Dodge ram 4wd.parts hauler 2016 Ram 2500 cause its a hemi 2006 VW TDI commuter __________________________________________ I guarantee there's a pregnant redneck teenager somewhere in a shitty trailer park that thinks "Ebola would be a lovely name for their child"...

04-03-2013, 11:59 PM	#11
muibubbles Bubble Tech Join Date: Oct 2008 Posts: 161 Rep Power: 18	THIS is suppose to be ready in 2 weeks. my gawd. BEGINNING TO FREAK OUT. __________________ Bubble Tech www.BubbleTech.us

04-10-2013, 09:14 PM	#12
reddozen Gold Wheels FTW Join Date: Mar 2008 Posts: 744 Rep Power: 18	I daily the bridge... no choice. __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

04-10-2013, 10:46 PM	#14
reddozen Gold Wheels FTW Join Date: Mar 2008 Posts: 744 Rep Power: 18	my money is reserved for the new 7 or whatever they call it. 4 years to go.... __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode