Rotary Turbos and Turbo bags!

silverfdturbo6port · 12-29-2012, 06:10 PM

I've used bags and wrap n street machines for many many years with no issues. Even with drag racing, autocross and numerous 180+mph pulls on 100* days I've never seen them "BDC" nor myself turn into a "KUUNT" but those are not harsh conditions like a race car as stated by Peter.
But for a dedicated "Race" car I will guarantee you will see the effects like in the OP.
But for daily driving/street use and you want to keep the bay temps down then Bags, wrap, shielding, heat coatings all work great.

12-29-2012, 06:10 PM	#10
silverfdturbo6port 500hp club Join Date: Feb 2011 Location: spokane Posts: 79 Rep Power: 15	I've used bags and wrap n street machines for many many years with no issues. Even with drag racing, autocross and numerous 180+mph pulls on 100* days I've never seen them "BDC" nor myself turn into a "KUUNT" but those are not harsh conditions like a race car as stated by Peter. But for a dedicated "Race" car I will guarantee you will see the effects like in the OP. But for daily driving/street use and you want to keep the bay temps down then Bags, wrap, shielding, heat coatings all work great. __________________ 500hp AEM EMS RotaryAutomotive street ported Aviation sealed 13b-rew 20B 20BEEST FD 23A 4 rotor Long gone 72 rx3 drag machine

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode