|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. |
|
|
Thread Tools | Display Modes |
02-10-2013, 01:37 PM
|
#11 |
|
Rotating Assembly
Join Date: Oct 2008
Location: TX
Posts: 102
Rep Power: 17  |
Those are the Corksport bumper caps. We got them specifically because with the CS Odura lip and OEM skirts that something was missing in the back; the continuous line broke. Have someone hold the skirts you have up to the car and stand back and you'll see.
We ran a line of the 3M tape all along the top. We saw a trick on one of Spike's Powerblock shows (probably trucks) how to leave a tail of the red covering folded out at 90 degrees so you can fit the part up by hand and then pull the red tape out exposing the sticky to the car. That tape is pretty damn magical. The car is in the garage and I dont know if it will be coming out today to take a picture.
__________________
  90 S5 Vert. JDM Tii with BNR Stage1 turbo. Pineapple Racing street port. Bonez cat-forward. Corksport cat-back with Vibrant UltraQuiet resonator. RTek 2 wZeitronix w/b. HKS EBC. Vis CF Tii hood. 3000GT wing. Ground Control coilover kit with KYB AGX shocks. Red and Black leather RX8 seats. Corksport Odura lip & bumper caps, OEM Tii skirts |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode