Starting engine while flooded

reddozen · 03-27-2013, 10:05 AM

I would imagine that a similar solution to the problem from the RX8 could fix this as well... Faster starter and upgraded ignition coils. I remember that my FC was plagued with fouling out plugs etc, but it wasn't tuned correctly, so it ran pig rich.

Rotary Evolution · 03-30-2013, 09:20 PM

Quote:

Originally Posted by reddozen

I would imagine that a similar solution to the problem from the RX8 could fix this as well... Faster starter and upgraded ignition coils. I remember that my FC was plagued with fouling out plugs etc, but it wasn't tuned correctly, so it ran pig rich.

i'm curious where this revised starter for the early generations can be located..

JL1RX7 · 03-31-2013, 08:44 AM

Have to get the 2K rated starter. Most parts places sell both. So get the one with the higher output.

03-27-2013, 10:05 AM	#1
reddozen Gold Wheels FTW Join Date: Mar 2008 Posts: 744 Rep Power: 18	I would imagine that a similar solution to the problem from the RX8 could fix this as well... Faster starter and upgraded ignition coils. I remember that my FC was plagued with fouling out plugs etc, but it wasn't tuned correctly, so it ran pig rich. __________________ My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-31-2013, 08:44 AM	#3
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA Posts: 487 Rep Power: 18	Have to get the 2K rated starter. Most parts places sell both. So get the one with the higher output.