My '88 TII build/resto

Buggy · 04-15-2013, 09:43 PM

I got back at this project today. I filled it with coolant, put the wheels and undertray back on, and put on my welded intake. I then took it for the maiden voyage! All I have to say is I couldn't be happier!!! It works awesome! Now I really need to get my fuel system upgraded. The stock injectors start to run out just as the turbo really starts to spool up and pull hard. This car is the ultimate! Still runs like stock, drives like stock, almost even as quiet as stock, but it can really pull!!!

04-15-2013, 09:43 PM	#29
Buggy I've been Wankeled! Join Date: Apr 2010 Location: Mildmay, Ontario, Canada Posts: 260 Rep Power: 16	I got back at this project today. I filled it with coolant, put the wheels and undertray back on, and put on my welded intake. I then took it for the maiden voyage! All I have to say is I couldn't be happier!!! It works awesome! Now I really need to get my fuel system upgraded. The stock injectors start to run out just as the turbo really starts to spool up and pull hard. This car is the ultimate! Still runs like stock, drives like stock, almost even as quiet as stock, but it can really pull!!! __________________ 1976 Rx-4 hardtop. Half bridge 3B 13B, S5 NA rotors, Renesis e-shaft, stat gears, and bearings, balanced rotating assembly, RE dual weber 36 DCD's 203rwhp 137ft-lbs torque DGRR 2011 3rd place 1974 Rx-4 all original 27,000 miles 1988 Rx-7 TII 320rwhp. DGRR 2012 3rd place

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode