4 port or 6 port

fc nut · 04-26-2013, 04:28 AM

whoever told you that an 88 n/a engine can't be ran by the se's ecu didn't know what they're talking about. i'm currently running an 87 n/a in my gsl se.you use the 88 engine with the se's wiring and sensors.there's a couple of little more things but,all you have to do to make it work is the following

use the se's distributor
gsl se front cover and oil pan
remove emissions and block off the bac valve
block off the secondary injector ports and run the se's injectors and fpr
use the se's tps and the 88's mounting bracket
you have to use the 88's intake piping with an adapter for the se's air flow meter

04-26-2013, 04:28 AM	#1
fc nut member Join Date: Jun 2008 Location: Lebanon,Ohio Posts: 282 Rep Power: 18	whoever told you that an 88 n/a engine can't be ran by the se's ecu didn't know what they're talking about. i'm currently running an 87 n/a in my gsl se.you use the 88 engine with the se's wiring and sensors.there's a couple of little more things but,all you have to do to make it work is the following use the se's distributor gsl se front cover and oil pan remove emissions and block off the bac valve block off the secondary injector ports and run the se's injectors and fpr use the se's tps and the 88's mounting bracket you have to use the 88's intake piping with an adapter for the se's air flow meter __________________ leaving my carbon footprint....one start up at a time

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode