Whizbang's RX-2

WE3RX7 · 06-25-2013, 07:13 PM

I didn't forget about your measurements - I got held up working on the RX8 and moving cars around the last few weekends.

As mentioned before... our RX3 has a completely modified strut mount, so I'm not sure if measurements will help:

That's what our setup looks like. If you're interested in this type of modification, I can get you any measurement from it you need. It basically involves just cutting out the OEM tops and welding in a new thick plate and then drill where you need the holes....

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

06-25-2013, 07:13 PM	#11
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	I didn't forget about your measurements - I got held up working on the RX8 and moving cars around the last few weekends. As mentioned before... our RX3 has a completely modified strut mount, so I'm not sure if measurements will help: That's what our setup looks like. If you're interested in this type of modification, I can get you any measurement from it you need. It basically involves just cutting out the OEM tops and welding in a new thick plate and then drill where you need the holes....