Car dying when hot ambient (but engine temp is good)

Whizbang · 07-01-2013, 04:07 PM

the stock gauge cluster is being used.

JL1RX7 · 07-01-2013, 04:15 PM

I would get something besides the stock cluster. You can use the CANBUS to read all the engine sensors if you have a translator and output device. With the stock cluster you have three settings for the temp gauge. Off, normal and new engine. Oil pressure is off and like 5 psi. So they are this side of useless.

07-01-2013, 04:07 PM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	the stock gauge cluster is being used. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-01-2013, 04:15 PM	#2
JL1RX7 Rotary Fanatic Join Date: Feb 2008 Location: Front Royal, VA Posts: 487 Rep Power: 18	I would get something besides the stock cluster. You can use the CANBUS to read all the engine sensors if you have a translator and output device. With the stock cluster you have three settings for the temp gauge. Off, normal and new engine. Oil pressure is off and like 5 psi. So they are this side of useless.