|
RX-8 (2004 - Present) All things to do with RX-8 |
![]() |
|
Thread Tools | Display Modes |
![]() |
#31 |
The Newbie
Join Date: Oct 2010
Location: In my house
Posts: 2
Rep Power: 0 ![]() |
I have a completely original 04 RX-8. Original coils, etc. Due to my own stupidity, I flooded it twice in the early days. I cleared it by removing the spark plugs and cranking the engine until clear. I then replaced the plugs, added a second battery with jumper cables to another car and floored the accelerator. Started up fairly quickly, but that end of my neighborhood disappeared in a cloud of white smoke for a few seconds.
About a week after the second flood, I received the spark plug upgrade notice from Mazda. The hotter (leading plugs I think) combined with an Optima red top battery (1000 cranking amps or so) solved the starting problem. One piece of advice is to NEVER shut the engine off unless it is completely warmed up. That's what caused my problems. I too rev the engine to 8000 RPM (usually in 1st or 2nd) sometime before I park it. I change oil and filter every 3000 miles and don't care what anyone says, it isn't that expensive, and I have 40,000 miles on the original engine with normal compression. One other thing, I don't use 0W- or 5W- oil in anything. Just a premium grade of non-synthetic 10W-40 in the summer and 10W-30 in the winter. The manufacturers recommend that thinner oil to increase overall gas mileage in their whole line of cars for EPA mileage ratings more than any other reason. No pre-mix or SeaFoam to prevent carbon build up. Just common sense. I have a friend that does this with his 04 and he has over 100,000 miles on this original daily driver. |
![]() |
![]() |
![]() |
#32 |
The Newbie
Join Date: Jul 2013
Location: Middle Tennessee
Posts: 12
Rep Power: 0 ![]() |
Ok just let me know when and where the next meet is and I will be there!
|
![]() |
![]() |
![]() |
#33 |
rotary owner/driver.
Join Date: Jun 2013
Posts: 69
Rep Power: 0 ![]() |
I looked into the compression test and the stealer ship said it costs around $300.00 ( Lake wood racing Mazda). I am looking for some one who has a tester I can use. I could buy one I suppose, but I don't know where or how much?. How often do you compression test?. I know it has to be a tester made for the rx8 motor I think>?.
|
![]() |
![]() |
![]() |
#34 | |
rotary owner/driver.
Join Date: Jun 2013
Posts: 69
Rep Power: 0 ![]() |
Quote:
Is your 8 an auto or mt?. |
|
![]() |
![]() |
![]() |
#35 |
Gold Wheels FTW
Join Date: Mar 2008
Posts: 744
Rep Power: 18 ![]() |
A compression test at the dealer should cost about $80~$100 tops....
__________________
My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works) |
![]() |
![]() |
![]() |
#36 |
rotary owner/driver.
Join Date: Jun 2013
Posts: 69
Rep Power: 0 ![]() |
|
![]() |
![]() |
![]() |
#37 |
Gold Wheels FTW
Join Date: Mar 2008
Posts: 744
Rep Power: 18 ![]() |
Yea, $300 would by you your own digital tester...
__________________
My Cars: 1974 RX4 Coupe 1991 FC3S RX7 - Sold 2003 ZZW30 MR2 (Rotary swap after RX8) 2004 SE3P RX8 (20B Swap in the works) |
![]() |
![]() |
![]() |
#38 |
rotary owner/driver.
Join Date: Jun 2013
Posts: 69
Rep Power: 0 ![]() |
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
"stupid is expensive" |
Thread Tools | |
Display Modes | |
|
|