Aluminum oil filler neck

Mitchocalypse · 05-27-2013, 09:52 AM

Im wondering if anybody knows where I could get an aluminum oil filler neck that ISNT Re-speed.

Specifically I'm looking for somewhere that will:
A) actually send me the product after I pay for it
B) answer a phone call or email a month after I have paid for it and it still hasnt been shipped out
C) not require me to file a PayPal claim

Thanks

Monkman33 · 05-27-2013, 02:04 PM

I have a zeeshan oil filler neck, but I don't think they are made any longer.

Perhaps someone could replicate it? I could look into to doing so but I am not sure as to the time frame. probably not soon at all due to finishing up my custom thermostat housing adapter.... which came out WAY bigger than I had hoped. Just trying to be honest.

Mitchocalypse · 05-27-2013, 04:11 PM

If you could get a price and a time frame for you to replicate it I would probably be interested

Edit: except not the timeframe part because you already said you were unsure lol

Monkman33 · 08-10-2013, 08:48 PM

I am going to be starting on making a new version soon. I don't like the slightly imperfect fit of the flange on my current one.

targarx7 · 08-12-2013, 01:31 AM

Please PM me when you make the oil filler neck.

Monkman33 · 08-12-2013, 11:07 PM

I will be doing a group buy. Probably out of stainless, but might be aluminum. depends on availability of parts.

Monkman33 · 09-26-2013, 05:13 PM

Update.

I have all the materials.

Trust me. These things are going to be trick!! I took the existing design that's out there and made some realreally nice cosmetic improvements. Plus, being made out of stainless, they can be coated or polished.

the spyder · 09-26-2013, 05:18 PM

Were you able to find a pre-made cap/threaded neck? It's what I have used in the past and it dropped the price significantly.

Monkman33 · 09-26-2013, 05:24 PM

None that I liked the look of.

So I am having some made up that look badass. I know the price is a bit higher than most, but it will be completely worth it.

I am also making sure the factory cap works.

If there is enough interest, I may be able to have some aluminum caps made up.

the spyder · 09-26-2013, 05:33 PM

Cool, I did not notice the stainless part- I wish I had clear coated the aluminum on mine- ended up pretty dirty after a few track days.

Monkman33 · 11-08-2013, 05:24 PM

Prototype is done. I partnered up (with a yet to be mentioned rotary company) to get costs back down to be able to hit the retail mark of just over $200.

There should be much more information available next week.
There will be a large quantity available.

These things look sweet!!

theorie · 11-09-2013, 08:35 AM

Check with IRPerformance.

Monkman33 · 11-09-2013, 12:18 PM

^^correct. I hope it doesn't deter people that I partnered up, but I just knew there would be more interest than up front capital I could supply. So we found a sweet spot in cost/quantity of the 4 different machined parts.

Kman Art · 11-11-2013, 09:49 AM

Interested in this as well. I need to look into doing an oil catch can setup so this would be one mod that would go along it.

kraftjason413 · 11-18-2013, 10:14 AM

Is this a cosmetic upgrade or is there an issue with stock pieces? I ask because I am a FNG on the FD so please be gentle.

05-27-2013, 09:52 AM	#1
Mitchocalypse Rotary Fanatic Join Date: Jun 2012 Location: Edmonton, AB Posts: 179 Rep Power: 14	Aluminum oil filler neck Im wondering if anybody knows where I could get an aluminum oil filler neck that ISNT Re-speed. Specifically I'm looking for somewhere that will: A) actually send me the product after I pay for it B) answer a phone call or email a month after I have paid for it and it still hasnt been shipped out C) not require me to file a PayPal claim Thanks __________________

05-27-2013, 02:04 PM	#2
Monkman33 Still Building my FD Join Date: Jun 2009 Location: Pasco, WA Posts: 255 Rep Power: 17	I have a zeeshan oil filler neck, but I don't think they are made any longer. Perhaps someone could replicate it? I could look into to doing so but I am not sure as to the time frame. probably not soon at all due to finishing up my custom thermostat housing adapter.... which came out WAY bigger than I had hoped. Just trying to be honest. __________________ Uh.... hi.

05-27-2013, 04:11 PM	#3
Mitchocalypse Rotary Fanatic Join Date: Jun 2012 Location: Edmonton, AB Posts: 179 Rep Power: 14	If you could get a price and a time frame for you to replicate it I would probably be interested Edit: except not the timeframe part because you already said you were unsure lol __________________

08-10-2013, 08:48 PM	#4
Monkman33 Still Building my FD Join Date: Jun 2009 Location: Pasco, WA Posts: 255 Rep Power: 17	I am going to be starting on making a new version soon. I don't like the slightly imperfect fit of the flange on my current one. __________________ Uh.... hi.

08-12-2013, 11:07 PM	#6
Monkman33 Still Building my FD Join Date: Jun 2009 Location: Pasco, WA Posts: 255 Rep Power: 17	I will be doing a group buy. Probably out of stainless, but might be aluminum. depends on availability of parts. __________________ Uh.... hi.

08-12-2013, 01:31 AM	#5
targarx7 The Newbie Join Date: Jan 2012 Posts: 8 Rep Power: 0	Please PM me when you make the oil filler neck.

09-26-2013, 05:13 PM	#7
Monkman33 Still Building my FD Join Date: Jun 2009 Location: Pasco, WA Posts: 255 Rep Power: 17	Update. I have all the materials. Trust me. These things are going to be trick!! I took the existing design that's out there and made some realreally nice cosmetic improvements. Plus, being made out of stainless, they can be coated or polished. __________________ Uh.... hi. Last edited by Monkman33; 11-21-2013 at 02:12 AM.

09-26-2013, 05:18 PM	#8
the spyder Rotary Fan in Training Join Date: Jun 2008 Posts: 38 Rep Power: 0	Were you able to find a pre-made cap/threaded neck? It's what I have used in the past and it dropped the price significantly.

09-26-2013, 05:24 PM	#9
Monkman33 Still Building my FD Join Date: Jun 2009 Location: Pasco, WA Posts: 255 Rep Power: 17	None that I liked the look of. So I am having some made up that look badass. I know the price is a bit higher than most, but it will be completely worth it. I am also making sure the factory cap works. If there is enough interest, I may be able to have some aluminum caps made up. __________________ Uh.... hi. Last edited by Monkman33; 09-26-2013 at 05:28 PM.

09-26-2013, 05:33 PM	#10
the spyder Rotary Fan in Training Join Date: Jun 2008 Posts: 38 Rep Power: 0	Cool, I did not notice the stainless part- I wish I had clear coated the aluminum on mine- ended up pretty dirty after a few track days.

11-08-2013, 05:24 PM	#11
Monkman33 Still Building my FD Join Date: Jun 2009 Location: Pasco, WA Posts: 255 Rep Power: 17	Prototype is done. I partnered up (with a yet to be mentioned rotary company) to get costs back down to be able to hit the retail mark of just over $200. There should be much more information available next week. There will be a large quantity available. These things look sweet!! __________________ Uh.... hi.

11-09-2013, 08:35 AM	#12
theorie VRR PSSH Join Date: Apr 2009 Location: Sarasota, FL Posts: 113 Rep Power: 17	Check with IRPerformance. __________________ 1993 SSM, 20B (D449), SINGLE-TURBO, DIY-BUILD IN THE WORKS... \|Build Thread\| 1993 BB, 13B, SINGLE-TURBO, DAILY DRIVER \|Build Thread\| MY FACEBOOK PROFILE // BLACK LABEL ENGINEERING // ADVANCED RACE TECH // IR PERFORMANCE // THE BOOST LAB // [url=rotaryaddicts.com]

11-09-2013, 12:18 PM	#13
Monkman33 Still Building my FD Join Date: Jun 2009 Location: Pasco, WA Posts: 255 Rep Power: 17	^^correct. I hope it doesn't deter people that I partnered up, but I just knew there would be more interest than up front capital I could supply. So we found a sweet spot in cost/quantity of the 4 different machined parts. __________________ Uh.... hi.

11-11-2013, 09:49 AM	#14
Kman Art The Converted Join Date: Oct 2012 Location: Cayman Islands Posts: 49 Rep Power: 0	Interested in this as well. I need to look into doing an oil catch can setup so this would be one mod that would go along it.

11-18-2013, 10:14 AM	#15
kraftjason413 The Newbie Join Date: Oct 2013 Location: Gulf Coast Posts: 23 Rep Power: 0	Is this a cosmetic upgrade or is there an issue with stock pieces? I ask because I am a FNG on the FD so please be gentle.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode