|
|||||||
| Rotary Tech - General Rotary Engine related tech section.. Tech section for general Rotary Engine... This includes, building 12As, 13Bs, 20Bs, Renesis, etc... |
|
|
Thread Tools | Display Modes |
|
|||||||
| Rotary Tech - General Rotary Engine related tech section.. Tech section for general Rotary Engine... This includes, building 12As, 13Bs, 20Bs, Renesis, etc... |
|
|
Thread Tools | Display Modes |
03-22-2014, 01:41 PM
|
#16 |
|
Rotary Fan in Training
Join Date: Jun 2011
Posts: 50
Rep Power: 0  |
i did some GIMP'ing and overlayed two screenshots of the wastegate rod and arm fully open and fully shut, and it looks like the angles are within spec.
also used the measuring tool in GIMP to measure the wastegate arm angle. wastegate arm is exactly as the borg warner installation manual says it should be at full stroke (~50 degrees), and of course the point of view isnt perfect, but it's close enough: Last edited by jacobcartmill; 03-22-2014 at 01:51 PM. |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode