|
![]() |
#1 |
Rotary Fan in Training
Join Date: Oct 2008
Posts: 87
Rep Power: 17 ![]() |
Have you pulled the plugs to see if they are all firing?
It isn't unheard of to have a coil or wire or plug that is defective out of the box. Use a coil tester to check the coils.... Have you reset the ESS profile? Sometimes you have to do it a couple of times to make sure it takes.... If all of that is OK...then you might want to do a compression check...if you have an apex seal problem that is allowing combustion gases to bypass the seal you can get missfires..... Other than that...ECU, wiring, power and grounds to coils, wiring to ESS can all cause problems. You will also have to check the fuel injectors...if one is not firing properly you could have a fuel related missfire Good luck.... |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|