1979 carb problem

mystery · 05-27-2014, 10:45 PM

mine would do the same thing... on 3 different carbs i had found around town in salvage yards. i eventually attempted to rebuild one and it still had done the same thing. my advise on a stock setup check fuel pressure should be between 3 and 4 lbs and if that checks out completely replace the carb i was told by more than one rotary shop that the center piece of those carbs get porus and wont hold enough vaccum to keep it running high possiblity your experiencing the same thing.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

05-27-2014, 10:45 PM	#7
mystery Rotary Fan in Training Join Date: Dec 2012 Posts: 91 Rep Power: 13	mine would do the same thing... on 3 different carbs i had found around town in salvage yards. i eventually attempted to rebuild one and it still had done the same thing. my advise on a stock setup check fuel pressure should be between 3 and 4 lbs and if that checks out completely replace the carb i was told by more than one rotary shop that the center piece of those carbs get porus and wont hold enough vaccum to keep it running high possiblity your experiencing the same thing.