Thinking of going e-fan

[TitaniumTT]

Originally Posted by driftxsequence

Oil temps followed coolant. I think I stopped once oil hit 215-220. Currently I have the oil cooler sitting in front of the radiator. I feel this is a mistake and needs to be moved

It is

Originally Posted by driftxsequence

but for ease of installation this was my choice. undertray is installed, and there is a rad panel in the front. you can see the ripped foil tape from where i had it sealing the intercooler.

The oil cooler is heating the radiator and the SS panel is as well.

Originally Posted by driftxsequence

My fan is on a switch currently because the MS isnt clicking the relay. I can manually ground the relay and have the fan kick on, but the MS output wont ground it. it clicks on and off.

Probably something in the programming or just because megasuck

Originally Posted by driftxsequence

here is my v mount, and you can see the oil cooler partially blocking the radiator.

Very similar to mine, except bigger rad, bigger dual oil coolers, bigger intercooler.

How air-tight do I need it to be?

Mine is air tight and probably water tight. The more air you can force throught he heat exchangers, the lower the temps will be.