Rice Racing M&W CDI COP Set-up

[RICE RACING]

Originally Posted by t_g_farrell

This is very cool. Would this fit 12A spacing by just twisting the COP adapters a bit or does
the bracket need to be modified to do that? I suspect the twisting the adaptors won't line
up with the plugs well.

Whats the ballpark $$ on this? We talking 100s or 1000s of dollars? Plus shipping of course.

Thanks,

If I were Adobe I should charge around $20,000 for this

But seriously I hope it to be in 100's range rather than 1000's cause otherwise I myself will run high tension leads or rip it all out and put in a boat anchor engine haha.

On the 12A front:
* COP Adaptors are universal (fit anything)
* Engine bracket needs redesign per engine
* Coil spacer brackets need adjustment to suit spark plug spacing in X & Y dimensions


Would have to design an engine bracket mount that uses the bottom large hole in the center plate

Best to put a 13B-REW in it