My RX7SP build up

[sa22c]

Originally Posted by RICE RACING

While I have not owned everything myself I have had the opportunity to drive LOTS of cars fitted with all the big brands inc race stuff made here in Australia and my own opinion is nothing is better than the Ohlins, my car is a street car #1 and used as such, the suspension is perfect for that and good enough on track too.

Spring rate and damper settings are spot on, very comfortable with zero bottoming at full pace, cant ask for anything more.

I like them anyway.

When you say Race stuff made here in Australia are you talking about MCA race series suspension? The high end ohlins sound awesome. Can you give an indication of height in mm to front and rear guard and roughly where you are in terms of bottom perch adjustment? Do yours have helper springs front and rear?

[RICE RACING]

Originally Posted by sa22c

When you say Race stuff made here in Australia are you talking about MCA race series suspension? The high end ohlins sound awesome. Can you give an indication of height in mm to front and rear guard and roughly where you are in terms of bottom perch adjustment? Do yours have helper springs front and rear?

Proflex mainly

ride height is legal 100mm of ground at lowest point is how I set it up.
Car can be jacked higher or much lower, just depends how much pre load on springs, all 4 have helper.

When I was in NSW I did a blue slip inspection with my Ohlins in and set to factory ride height spec for the SP.

Then changed it to minimum legal height.