Middle TN - Thread - Page 199

Johnny_K · 02-01-2016, 06:19 PM

U shoulda just bought a new ast..

what clutch u going with?

85rx-7gsl-se · 02-01-2016, 07:45 PM

Whats the biggie with a used aftermarket AST? Probably just a stock Exedy for now.

Johnny_K · 02-01-2016, 08:23 PM

Ah didn't realized u bought an aftermarket one. for some reason thought u got a used oem 1.

you should be happy with the stock exedy one. Wished I had one in my car.

85rx-7gsl-se · 02-01-2016, 08:51 PM

Yeah I am not planning to make enough power to need a stiff clutch.

FC Zach · 02-01-2016, 10:30 PM

I have an Exedy stage 2 in the Celica which is a puck design that is surprisingly tame, pedal pressure and feel is actually easier than the Exedy stage 1 that was originally installed.

FC Zach · 02-01-2016, 11:40 PM

Just throwing that out there in case you're on the fence about getting a heavier duty design but worried about driveability, if you are around mid TN anytime in the near future you're more than welcome to drive the Celica to get a feel for it.

85rx-7gsl-se · 02-02-2016, 08:42 AM

Thanks for the offer Zach and I will keep that in mind. I am planning on running stock twins non-non-sequential so shouldnt be working the clutch too hard haha.

***TitaniumTT*** · 02-02-2016, 09:23 AM

Dunno... I made 405rwhp with stock sequentials

And I've always had my exedy twin disc. I love it.... and I particularly like watching everyone stall it

85rx-7gsl-se · 02-02-2016, 09:44 AM

I dont have no twin disc money

***TitaniumTT*** · 02-02-2016, 10:38 AM

Just saying I don't mind daily driving twin disc

85rx-7gsl-se · 02-02-2016, 11:01 AM

I would love one, but cant justify the expense on my ugly FD

85rx-7gsl-se · 02-02-2016, 10:56 PM

Just bought a used Fluidyne radiator

chibikougan · 02-03-2016, 05:09 PM

Happy Bday Zach

FC Zach · 02-03-2016, 11:38 PM

Quote:

Originally Posted by chibikougan

Happy Bday Zach

Thanks buddy!

dakar318 · 02-04-2016, 11:17 AM

Quote:

Originally Posted by 85rx-7gsl-se

Used AST purchased and I am working a deal on a used Fluidyne radiator. Need to order my clutch and PP today or tomorrow.

YO if cheap is your game, then i have a low mileage OEM clutch that came off a JDM motorset I used.

Pplate still has cross hatching.

Whats it worth to you $100 shipped? Make me an offer, I am in Huntsville, Al.

02-01-2016, 10:30 PM	#2975
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN Posts: 2,267 Rep Power: 20	I have an Exedy stage 2 in the Celica which is a puck design that is surprisingly tame, pedal pressure and feel is actually easier than the Exedy stage 1 that was originally installed. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

02-01-2016, 11:40 PM	#2976
FC Zach RCC Loves Me Not You Join Date: Mar 2008 Location: Eagleville, TN Posts: 2,267 Rep Power: 20	Just throwing that out there in case you're on the fence about getting a heavier duty design but worried about driveability, if you are around mid TN anytime in the near future you're more than welcome to drive the Celica to get a feel for it. __________________ 1993 Yamaha GTS1000 1992 Celica Turbo AllTrac 1987 RX7 Sport 1979 Yamaha G1, KM24 powered 1975 Dolmar KMS4

02-02-2016, 09:23 AM	#2978
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Dunno... I made 405rwhp with stock sequentials And I've always had my exedy twin disc. I love it.... and I particularly like watching everyone stall it __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

02-02-2016, 10:38 AM	#2980
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	Just saying I don't mind daily driving twin disc __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-01-2016, 06:19 PM	#2971
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 13	U shoulda just bought a new ast.. what clutch u going with?

02-01-2016, 08:23 PM	#2973
Johnny_K Rotary Fanatic Join Date: Jun 2013 Posts: 225 Rep Power: 13	Ah didn't realized u bought an aftermarket one. for some reason thought u got a used oem 1. you should be happy with the stock exedy one. Wished I had one in my car.