Triple Gauge Pods For Sale! - Page 5

IR Performance · 08-05-2008, 09:25 PM

Mounting tabs on my pods are aluminum, so they won't break off after repeated installations and removals like the stock mazda pieces so.

dregg100 · 08-06-2008, 01:00 AM

so are they now for sale, or are you still teasing us?

IR Performance · 08-06-2008, 08:49 AM

First run will be done in 1-2 weeks. I can start putting together a list. Those that would like one can shoot me a pm.

IR Performance · 08-06-2008, 05:24 PM

-The list-
1. Brent
2. proz07
3. hades

hades · 08-06-2008, 06:22 PM

Its hard to see in the pics, but do the colors match up on the textured piece--i.e. same black" Does it look factory?

Looks good from what I can see.

IR Performance · 08-06-2008, 09:14 PM

I can't guarantee an exact match but it looks pretty close in my eyes. It will depend on the condition of your interior. Newer textured plastics appear to have a more satin finish while older ones that have been treated with armorall or similar appear darker. Plus since the pod is not mounted directly next to any of the factory trim plastic pieces, it would be hard to tell the difference. Also, I can have these made in any color you want if the demand is enough. I can make them pink if thats what someone wanted

hades · 08-07-2008, 04:37 PM

sounds good put me down for a textured piece.

IR Performance · 08-13-2008, 08:14 AM

I should have 5 ready to go by the end of the week.

Brent · 08-13-2008, 01:26 PM

*in Doc Holliday voice* say when...

fire85gslse · 08-16-2008, 11:45 PM

Quote:

Originally Posted by Lotte

i have to sell my dual gauge pods to get this.

Me too, but Ive been wanting to add one more guage and this will allow me

IR Performance · 08-20-2008, 04:06 PM

Quote:

Originally Posted by fire85gslse

Me too, but Ive been wanting to add one more guage and this will allow me

Shall I add you to the list?

Sukebe7 · 09-23-2008, 11:25 PM

What is the maximum gauge depth? I have the 52mm Greddy gauges and they are pretty long.
From the back of the bezel ring to the end is 2.25". Will they fit?

IR Performance · 09-24-2008, 10:06 AM

I have had Greddy gauges installed before and they fit without an issue for me. On some like Autometer you need to hack off or remove the stupid studs they come installed with.

PortedRotorTuner · 12-11-2008, 08:32 AM

Any update its three months later???

IR Performance · 12-11-2008, 08:19 PM

Quote:

Originally Posted by PortedRotorTuner

Any update its three months later???

What were you looking for?

08-05-2008, 09:25 PM	#61
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ Posts: 249 Rep Power: 18	Mounting tabs on my pods are aluminum, so they won't break off after repeated installations and removals like the stock mazda pieces so. __________________ Providing rotary engine rebuilds, porting, turbo installs, parts installations, full maintenance, etc. We work on all cars. www.irperformance.com www.myspace.com/rotaryexperimentseven irperformance@live.com 732-662-1794

08-06-2008, 01:00 AM	#62
dregg100 Rotary Fanatic Join Date: Feb 2008 Posts: 432 Rep Power: 18	so are they now for sale, or are you still teasing us? __________________ '93 SSM Touring-S475... '87 Tii-LS1/T56

08-06-2008, 08:49 AM	#63
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ Posts: 249 Rep Power: 18	First run will be done in 1-2 weeks. I can start putting together a list. Those that would like one can shoot me a pm. __________________ Providing rotary engine rebuilds, porting, turbo installs, parts installations, full maintenance, etc. We work on all cars. www.irperformance.com www.myspace.com/rotaryexperimentseven irperformance@live.com 732-662-1794

08-06-2008, 05:24 PM	#64
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ Posts: 249 Rep Power: 18	-The list- 1. Brent 2. proz07 3. hades __________________ Providing rotary engine rebuilds, porting, turbo installs, parts installations, full maintenance, etc. We work on all cars. www.irperformance.com www.myspace.com/rotaryexperimentseven irperformance@live.com 732-662-1794 Last edited by IR Performance; 08-07-2008 at 05:57 PM.

08-06-2008, 06:22 PM	#65
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land Posts: 316 Rep Power: 18	Its hard to see in the pics, but do the colors match up on the textured piece--i.e. same black" Does it look factory? Looks good from what I can see. __________________ This is going to tear

08-06-2008, 09:14 PM	#66
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ Posts: 249 Rep Power: 18	I can't guarantee an exact match but it looks pretty close in my eyes. It will depend on the condition of your interior. Newer textured plastics appear to have a more satin finish while older ones that have been treated with armorall or similar appear darker. Plus since the pod is not mounted directly next to any of the factory trim plastic pieces, it would be hard to tell the difference. Also, I can have these made in any color you want if the demand is enough. I can make them pink if thats what someone wanted __________________ Providing rotary engine rebuilds, porting, turbo installs, parts installations, full maintenance, etc. We work on all cars. www.irperformance.com www.myspace.com/rotaryexperimentseven irperformance@live.com 732-662-1794

08-07-2008, 04:37 PM	#67
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land Posts: 316 Rep Power: 18	sounds good put me down for a textured piece. __________________ This is going to tear

08-13-2008, 08:14 AM	#68
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ Posts: 249 Rep Power: 18	I should have 5 ready to go by the end of the week. __________________ Providing rotary engine rebuilds, porting, turbo installs, parts installations, full maintenance, etc. We work on all cars. www.irperformance.com www.myspace.com/rotaryexperimentseven irperformance@live.com 732-662-1794

08-13-2008, 01:26 PM	#69
Brent Sua Sponte Join Date: Feb 2008 Location: Killeen, TX Posts: 839 Rep Power: 18	in Doc Holliday voice say when... __________________ Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM

09-23-2008, 11:25 PM	#72
Sukebe7 The Newbie Join Date: Mar 2008 Posts: 3 Rep Power: 0	What is the maximum gauge depth? I have the 52mm Greddy gauges and they are pretty long. From the back of the bezel ring to the end is 2.25". Will they fit?

09-24-2008, 10:06 AM	#73
IR Performance Rotary Fanatic Join Date: Feb 2008 Location: Metuchen, NJ Posts: 249 Rep Power: 18	I have had Greddy gauges installed before and they fit without an issue for me. On some like Autometer you need to hack off or remove the stupid studs they come installed with. __________________ Providing rotary engine rebuilds, porting, turbo installs, parts installations, full maintenance, etc. We work on all cars. www.irperformance.com www.myspace.com/rotaryexperimentseven irperformance@live.com 732-662-1794

12-11-2008, 08:32 AM	#74
PortedRotorTuner レーサー Join Date: Sep 2008 Location: Columbus, Ohio Posts: 190 Rep Power: 18	Any update its three months later??? __________________ Thank God For Pistons! How else would we brake! NASA Great Lakes Region TTD #53 Rx7

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode