new head lights out soon.

Jeff20B · 08-16-2008, 11:09 PM

I would very much love to get some LED headlights if they're as great as I think they'll be. My current headlights are Sylvania xtravision which, while good, are still pretty crappy.

The rods were both broken (lacking nylon bushings) so both my headlights used to be aimed too low all the time making things difficult. I was able to replace the driver's side which helped a bit but the forward lighting is still dangerously inadequate.

I have a set of driving lights I was going to install as time permits. They should tide me over until the 12A LED headlights are a reality. Keep me posted.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-16-2008, 11:09 PM	#1
Jeff20B Rotary Fanatic Join Date: Mar 2008 Posts: 215 Rep Power: 18	I would very much love to get some LED headlights if they're as great as I think they'll be. My current headlights are Sylvania xtravision which, while good, are still pretty crappy. The rods were both broken (lacking nylon bushings) so both my headlights used to be aimed too low all the time making things difficult. I was able to replace the driver's side which helped a bit but the forward lighting is still dangerously inadequate. I have a set of driving lights I was going to install as time permits. They should tide me over until the 12A LED headlights are a reality. Keep me posted.