![]() |
#18 |
Red Neck Tony Stark - C2
Join Date: Mar 2008
Location: Houston Tx
Posts: 6
Rep Power: 0 ![]() |
Well there is a pretty decent Caravan getting together from texas, a few from Dallas and Houston.
I will be pulling 3, 2 FD's and a FC Turbo Vert with my truck, while having 5 riders. I want to try and organize the caravan to make sure no body is stuck on the road, I will have room for one more car on the Trailer but it is for emergency use only, My truck will be WAY overloaded with 4 cars. Please Email me with your plans so i can update the time lines. C2Rotary@gmail.com HERE IS WHAT IS POSTED ON THE I-10 States on RX7Club For the people that are planning on going to sevenstock and want to caravan down I-10 together As the event draws near we will have a better understanding of who wants to join in and where the can meet up with the group on I-10. From Houston there are about 4-5 People and 3 cars that will be heading to Irvine We have a group from Dallas that will be meeting somewhere around SA. Here is the agenda so far. Ok the plan is leave Houston in the evening 6-8PM, I will be driving about 60-65 because of the large load on my truck 15,000+ pounds of cars,trailer,people, and Junk Food. So we will be in SA about 3 hours later. From SA to El paso it is about 550 miles, at 60, we will make it there about 8:30AM, give or take some time for fill ups and RR breaks. From El paso to Phoenix is about 375 Miles, so at 60 5:30-6:00 hours, or about 3:00PM. I have added some time for small breaks and stuff. From Phoenix to Irvine CA it is about another 375 miles at 60mph, that will be about 5:30-6:00 hours or about 9:00Pm Friday night. Then get the Hotel rooms, Party and rest up for Sat events. I want to try and drive thru the desert at night, this would be good for are hot blooded cars also. That is the plan so far........ I would like to hear from anyone that is traveling from far east I-10 and would like to meet up in Houston, We are relaxed with the time line for leaving Houston, but I would like to see if anyone is coming from the East so we can get the times right.
__________________
93 Half-BP,GT45,2XOil Coolers, Front Mount, ACT Pro lite Flywheel-Pressure Plate, Power FC w/Datalogit, 850pri/1600sec, Twin-Fuel pumps,Crane Cam HI-6DS for true Ign Cut 2-Step, 6-Pluck Clutch Currently 550HP@18psi---Going to try E85 for 650+ HP ![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|