|
RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
|
Thread Tools | Display Modes |
![]() |
#5 |
Sua Sponte
Join Date: Feb 2008
Location: Killeen, TX
Posts: 839
Rep Power: 18 ![]() |
just throw some koni's or tokico's on with either some H&R Springs or Eibach Springs. It will lower it about an inch and improve handling... whether you track it or not. This is not the car to "slam". There have been plenty of people over the years that have lowered their FD too much and rubbed through the fender liner and wiring and gave the car quite a few issues. Also, you are going to drag your shit all over the place. If you just worked several 50 hour weeks to get a new clutch, plan on working alot more once you rip the sway bar off, bang up the exhaust, tranny, and engine as well. Here is what mine looks like when it had Tokico's and Eibach's:
![]()
__________________
Road Atlanta August 2011 NASA TT 1:33 http://www.youtube.com/watch?v=IFY00PAK_Ps Traqmate's video of my car from the 2011 UTCC at VIR http://www.youtube.com/watch?v=2Zcn6...layer_embedded Video of Yellow LS1 FD at NASA TT at VIR http://www.youtube.com/watch?v=e6k0lJkcwrM |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|