|
RX-7 3rd Gen Specific (1993-2002) RX-7 1993-2002 Discussion including performance modifications and Technical Support Sections. |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
All about the O2
Join Date: Sep 2008
Posts: 295
Rep Power: 17 ![]() |
On the FD I just finished building - we ran all the crankcase lines to a catch can only. The fuel atomization line went in front of the turbo for a vacuum source only.
The BC (Greddy I presume) looks right; COM goes to the watstegate if I remember correctly; you can get diretions from the Greddy site. A few things - the EMS MAP Sensor, BOV Vac Line and BC Pressure sensor should all be after the throttle body; right at the throttle body nipples or close to it; the UIM/LIM nipples I have heard don't give consistant readings. - The wastegate signal lines and boost only line for the BOV should be after the Turbo but before the Throttle Body. - The OMP and Fuel Atomization lines should all be vacuum only before the turbo. - Avoid T-inng the Vacuum source for the BOV and the MAP sensor; we did MAP Sensor; and BC on one line and Boost Gauge on its own, and BOV on its own. That is all from memory - so take it with a grain of salt.
__________________
My 2007 Turbocharged RX8 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|