Spooled up Racing's COMPLETE FC build

10-18-2008, 03:49 PM

ok so nobody local had the pinion snubber I will buy one but I don't know how it will mount and if it can be installed with everything back in the car.

Todays progress:

old OEM camber bar out

New mazda comp adjustable camber bar in:

I got the diff mounted to the subframe, the subframe back in the car, the rear sturs put in, the axles mounted.

I just need to get the bearings put in the rear hubs and on forward I can move.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

10-18-2008, 03:49 PM	#13
SpooledupRacing Guest Posts: n/a	ok so nobody local had the pinion snubber I will buy one but I don't know how it will mount and if it can be installed with everything back in the car. Todays progress: old OEM camber bar out New mazda comp adjustable camber bar in: I got the diff mounted to the subframe, the subframe back in the car, the rear sturs put in, the axles mounted. I just need to get the bearings put in the rear hubs and on forward I can move.