My Prosport water temp gauge mod and install

AHarada · 10-19-2008, 08:04 PM

I don't have their boost gauge yet, but any boost gauge can use any manifold vacuum/boost reference. It doesn't need to be the fuel regulator, but any vacuum line. There is an unused port on the UIM with a small plug that will work well. Please post when you have finished installing them on how you like them.

hades · 10-19-2008, 09:14 PM

pead hold memory makes sence. I heard one of those fuse is constant the other switched. I will find out for sure. Thanks for the help.

10-19-2008, 09:14 PM	#2
hades Rotary Fanatic Join Date: Mar 2008 Location: Freedom Land Posts: 316 Rep Power: 18	pead hold memory makes sence. I heard one of those fuse is constant the other switched. I will find out for sure. Thanks for the help. __________________ This is going to tear

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-19-2008, 08:04 PM	#1
AHarada Rotary Fanatic Join Date: Mar 2008 Posts: 162 Rep Power: 18	I don't have their boost gauge yet, but any boost gauge can use any manifold vacuum/boost reference. It doesn't need to be the fuel regulator, but any vacuum line. There is an unused port on the UIM with a small plug that will work well. Please post when you have finished installing them on how you like them.