My 6 year FC project

WE3RX7 · 10-22-2008, 09:50 PM

Well - I did hit a snag. The needle bearing c-arms dont work with my MS under brace. The brackets used on the MS bar interchange w/ the stock ones, but the needle bearing setup uses a special "cap" for the bearing and replaces the stock one. This put me in a bad mood for a while.

I have now discovered though, SuperNow makes a similar bearing setup that'll still replace the bushing on the c-arm, but uses the stock cap, so it "should" interchange w/ the MS bar. Nice thing is, the price of the SuperNow setup is about $350 for BOTH sides, where the needle bearing c-arm is $350 for one side...

Pics to come...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

10-22-2008, 09:50 PM	#11
WE3RX7 RCC Addict Join Date: Feb 2008 Location: VA Posts: 1,812 Rep Power: 19	Well - I did hit a snag. The needle bearing c-arms dont work with my MS under brace. The brackets used on the MS bar interchange w/ the stock ones, but the needle bearing setup uses a special "cap" for the bearing and replaces the stock one. This put me in a bad mood for a while. I have now discovered though, SuperNow makes a similar bearing setup that'll still replace the bushing on the c-arm, but uses the stock cap, so it "should" interchange w/ the MS bar. Nice thing is, the price of the SuperNow setup is about $350 for BOTH sides, where the needle bearing c-arm is $350 for one side... Pics to come...