| 
 | |||||||
| RX-7 2nd Gen Specific (1986-92) RX-7 1986-92 Discussion including performance modifications and technical support sections. | 
|  | Thread Tools | Display Modes | 
|  11-19-2008, 09:39 AM | #5 | 
| Pirate Join Date: Mar 2008 Location: Central IL 
					Posts: 1,323
				Rep Power: 19  | 
			
			Hmm, well personally, one of the problems I encountered was that my caliper pistons were sticking, causing irregular pad wear, so I would make sure to take a look at your pads to see that they are worn down even. Another little thing: The bleeder screws on our cars are notorious for snapping clean off, so i would put some anti-seize on them to prevent that from happening. ...now, if your calipers are old and look junky, you can get some rebuilt ones at Car Quest for $65 each when you bring the old ones in with you. 
				__________________ Rotaries:They are NOT that complicated! | 
|   |   | 
| Bookmarks | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 |