|
|||||||
| Show your rotary car build up. Show off your Rotary Car build! |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| Show your rotary car build up. Show off your Rotary Car build! |
|
|
|
Thread Tools | Display Modes |
|
|
11-23-2008, 06:39 PM
|
#1 |
|
RCC Addict
Join Date: Feb 2008
Location: Middle TN
Posts: 1,029
Rep Power: 19  |
Turbo worked performed by Garfinkle Motor Works (Thanks David)
You can see the cracks have been welded, some grinding has been done, and see the black spots in the flat surfaces (low spots due to warping). Those will be resurfaced to get some/most of that taken out. Here are those pics
__________________
I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit) Last edited by fire85gslse; 11-23-2008 at 06:53 PM. |
|
|
|
11-23-2008, 06:58 PM
|
#2 |
|
RCC Addict
Join Date: Feb 2008
Location: Middle TN
Posts: 1,029
Rep Power: 19 |
more on turbo work (Garfinkle Motor works)
__________________
I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit) |
|
|
|
|
11-23-2008, 07:08 PM
|
#3 |
|
RCC Addict
Join Date: Feb 2008
Location: Middle TN
Posts: 1,029
Rep Power: 19 |
more pictures of turbo work done by Garfinkle Motor works
__________________
I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit) |
|
|
|
|
11-23-2008, 07:16 PM
|
#4 |
|
RCC Addict
Join Date: Feb 2008
Location: Middle TN
Posts: 1,029
Rep Power: 19 |
pics
Last edited by fire85gslse; 07-25-2010 at 07:30 PM. |
|
|
|
|
11-23-2008, 07:19 PM
|
#5 |
|
RCC Addict
Join Date: Feb 2008
Location: Middle TN
Posts: 1,029
Rep Power: 19 |
My cheap Radiator that I had to modify the shroud to fit. Had to use bolts and nuts to mount it on the bottom and had to open up the holes on the shroud top sine it all was not lining up perfect.
Then I had to notch the shroud since the upper tube was at a different angle over the stock location (seen in the next group of pics). If you buy one of these keep in mind that its not a direct drop in nor does it have a drain or a line for the AST. If I would had known about this up front I would have spent more for the right one. But again $150 for this was not too bad even with the mods I had to do.
__________________
I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit) Last edited by fire85gslse; 11-23-2008 at 07:48 PM. |
|
|
|
|
11-23-2008, 07:35 PM
|
#6 |
|
RCC Addict
Join Date: Feb 2008
Location: Middle TN
Posts: 1,029
Rep Power: 19 |
more radiator pics.
Had to remove the name on it
__________________
I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit) Last edited by fire85gslse; 07-25-2010 at 07:30 PM. |
|
|
|
|
11-23-2008, 07:45 PM
|
#7 |
|
RCC Addict
Join Date: Feb 2008
Location: Middle TN
Posts: 1,029
Rep Power: 19 |
Motor sitting waiting for more work and harness to be complete.
Here is my motor sitting there now with the turbos back on.
__________________
I own A few Rotaries and Yes, I have a rotary problem. (SELLING OFF All my parts) 79SA(Respeed Car),93 FD (tweakit) Last edited by fire85gslse; 11-23-2008 at 07:59 PM. |
|
|
|
|
12-03-2008, 09:22 PM
|
#8 |
|
I SEE DEAD PEOPLE
Join Date: Mar 2008
Location: nashville, tn (antioch)
Posts: 743
Rep Power: 18 |
I want your unmolested car soooooo bad.
__________________
VIN-AUTO Rotary list of Fails below: 86 mazda rx7 csp 61 N/A= because RACECAR 87 mazda rx7 t2 with 13b-re cosmo GT42= FKN RUNS!!! 03 Dodge Viper SRT-10 Vert 06 dodge ram 2500 Megacab turbo Cummins=puller 16 MB ML350 |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
