Question regarding bleeding brakes

firzen · 11-26-2008, 11:09 PM

I have/had the same issue. I just keep going, give up for a day, then come back later. My brakes still don't feel as firm as I'd like but they still work; the shop that gave me the annual State Inspection even OK'd it.

I will probably bleed them again come springtime. Hopefully the fluid would have absorbed/dissolved some of the bubbles. Might be wishful thinking on my part but I'm not keen on bleeding the brakes when it's below 30°F in the garage.

Good luck.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

11-26-2008, 11:09 PM	#7
firzen Rotary Fanatic Join Date: Mar 2008 Posts: 231 Rep Power: 18	I have/had the same issue. I just keep going, give up for a day, then come back later. My brakes still don't feel as firm as I'd like but they still work; the shop that gave me the annual State Inspection even OK'd it. I will probably bleed them again come springtime. Hopefully the fluid would have absorbed/dissolved some of the bubbles. Might be wishful thinking on my part but I'm not keen on bleeding the brakes when it's below 30°F in the garage. Good luck.