high boost on stock sequential twins - pfc charts!

neit_jnf · 11-30-2008, 01:24 PM

the pfc does control boost and so far its been doing it well. I set this level of boost for some fun runs but normally i set it at 9psi, i have the boost switch enabled so I can switch from low and high boost on the fly.

all the info is on the pics I posted, afr's are in the low 10's, knock under 25. I plan on trimming the fuel and aiming for 11.2:1 afrs

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

11-30-2008, 01:24 PM	#3
neit_jnf Boricua! Join Date: Jul 2008 Location: Puerto Rico Posts: 99 Rep Power: 18	the pfc does control boost and so far its been doing it well. I set this level of boost for some fun runs but normally i set it at 9psi, i have the boost switch enabled so I can switch from low and high boost on the fly. all the info is on the pics I posted, afr's are in the low 10's, knock under 25. I plan on trimming the fuel and aiming for 11.2:1 afrs