Go Back   Rotary Car Club > Vendors and Group Buys > All Vendors > Ludwig Motorsports

Ludwig Motorsports www.ludwigmotorsports.com (IN/KY) Full service; rotary engine builds, swaps, fabrication, etc.

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-04-2009, 04:47 PM   #11
C. Ludwig
Rotary Masochist
 
Join Date: May 2008
Location: Floyds Knobs, IN
Posts: 494
Rep Power: 18
C. Ludwig is on a distinguished road
The driveability won't suffer at all either way. As I've said before with the 6PI hardware removed you'll make more top end than with a working 6PI system. I feel the trade off is worth it. The changes you've made to the exhaust will more than make up for the elimination of the 6PI and VDI at low revs. IMO the best system is to remove the 6PI all together as you have and leave the VDI working. But the VDI is only worth a few hp at the lowest revs. Losing it isn't something I would lose sleep over.

It will be easy enough, once the car is on the dyno, to run the car with the VDI in both locations to see exactly what the differences are. If it turns out to be a gain you feel is necessary you can always make the system workable after the fact.
__________________
_______________________________________________



One stop Haltech, AEM, Syvecs shopping. Installation and tuning.
http://www.lms-efi.com
Free support. Drop us an email.
chris@lms-efi.com
502-515-7482
Facebook @LMS-EFI
C. Ludwig is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:28 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com