My T2 build - Page 2

djmtsu · 03-01-2008, 09:51 AM

Good luck man!! I wish I was working on the 7, unfortunately I have to help a friend put a new cylinder head on a 92 Escort, and WP and timing belt. Piston engines FTL.

03-01-2008, 11:53 PM

Ok so me and RX7tuner built the engine today... it was alot of fun, we had alot of laughs a few head scratchers and well something that just made us go WOW

but here it is as of tonight...

The control rings with the o-rings installed

Installed in the rotors

The rotors are all lubed up with Crisco

This iron has the o-rings installed and layered with crisco

umm yeah there I am .... with the shaft!!!

1 plate at a time

Getting closer

Together

assembled

I forgot to mention with my fingers in the plug holes and the engine turned over it had GREAT compression!!!

87 t-66 · 03-02-2008, 05:34 PM

thats pretty good..ive never seen anyone use crisco before haha

03-02-2008, 05:56 PM

On the videos at www.pineappleracing.com he said to use Crisco.. so I guess some one does lol

here is some new stuff

Here are the pics I just took...

look at the layers

waste leaves here

The real deal!

Rx7Tuner · 03-02-2008, 06:07 PM

She is pretty.

03-02-2008, 08:29 PM

Thank you sir!!

03-05-2008, 08:50 AM

Well last night I got my lim cleaned and painted... my crank pulley cleaned and painted.. my water pump housing is cleaned (painting tonight) and I plan to clean the uim tonight...

I will get pics tonight of everything done and the process as it unravels..

need RX7 · 03-10-2008, 05:51 PM

updates?

03-13-2008, 07:10 AM

The lim is bolted on
the exhaust manifold is completly stripped down and ready for high temp paint
the upper fuel rail has been painted (red)
the turbo was broken apart to clean and paint and I found the exhaust side was cracked inside.. (awaiting a new one)

still waiting for a clutch kit and flywheel

tonight I will paint the compressor housing (gunmetal)
tonight I will paint the lower fuel rail (red)
tonight I plan to paint the exhaust manifold (black)
tonight I plan to clean the uim and get it prepped for paint

next weekend I will send the injectors out to get cleaned and flow tested.

03-13-2008, 08:13 PM

Time for updates...

since last time I have:
cleaned and painted the water pump housing
cleaned and painted both fuel rails
cleaned and painted the thermostat neck

pulled the turbo apart (found the exhaust housing is junk) clean and painted the compressor housing

mounted the upper intake
mounted the upper fuel rail (need to put injectors in of course)
put the water pump housing on (awaiting water pump)

here are some pictures

From a nice neat table to this mess

Willub and Company · 03-14-2008, 10:25 AM

looks very nice, make sure you take a video of the start up!

03-14-2008, 10:56 AM

OH will do.

03-23-2008, 10:18 AM

nothing really new to update.. I did however buy my ACT lightweight flywheel yesterday...

03-24-2008, 01:54 PM

Well ACT's website is wrong.. the flywheel I bought will NOT work on my car so now I am out the time and money in order to get the flywheel and resell it then buy a new one to get the engine installed!!!

this is why I HATE ACT!!!!

turbovert91 · 03-25-2008, 05:15 PM

That sucks, you were making good time on the rest of your project, too...

03-01-2008, 09:51 AM	#16
djmtsu My minds tellin' me no... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 4,043 Rep Power: 22	Good luck man!! I wish I was working on the 7, unfortunately I have to help a friend put a new cylinder head on a 92 Escort, and WP and timing belt. Piston engines FTL. __________________ 1976 Mazda Cosmo RX-5 1976 Mazda Cosmo RX-5 2003 Toyota Tundra TRD 2015 Toyota 4Runner SR5

03-01-2008, 11:53 PM	#17
SpooledupRacing Guest Posts: n/a	Ok so me and RX7tuner built the engine today... it was alot of fun, we had alot of laughs a few head scratchers and well something that just made us go WOW but here it is as of tonight... The control rings with the o-rings installed Installed in the rotors The rotors are all lubed up with Crisco This iron has the o-rings installed and layered with crisco umm yeah there I am .... with the shaft!!! 1 plate at a time Getting closer Together assembled I forgot to mention with my fingers in the plug holes and the engine turned over it had GREAT compression!!! Last edited by SpooledupRacing; 03-02-2008 at 08:07 AM.

03-02-2008, 05:56 PM	#19
SpooledupRacing Guest Posts: n/a	On the videos at www.pineappleracing.com he said to use Crisco.. so I guess some one does lol here is some new stuff Here are the pics I just took... look at the layers waste leaves here The real deal! Last edited by SpooledupRacing; 03-02-2008 at 06:08 PM.

03-02-2008, 06:07 PM	#20
Rx7Tuner The Newbie Join Date: Feb 2008 Posts: 2 Rep Power: 0	She is pretty. __________________ l 1991 Rx7 N/A l Fresh Rebuild with Streetport, Megasquirt 1 v3.0 l Emissions Removal, ACT S/S Clutch, Custom AAI, l RB True Dual Exhaust, Tein Springs, TII Calipers

03-10-2008, 05:51 PM	#23
need RX7 Clean S4 Nutswinger Join Date: Mar 2008 Location: Sterling Heights, MI Posts: 485 Rep Power: 18	updates? __________________ -Ted -1986 Mazda RX7 Sport [DD/beater]: engine finally let go at 205k. parts car status. -1986 Mazda RX7 base [resto-mod project]: S5 n/a swap in progress.

03-02-2008, 05:34 PM	#18
87 t-66 Rotary Fanatic Join Date: Feb 2008 Location: Columbus, OH Posts: 161 Rep Power: 18	thats pretty good..ive never seen anyone use crisco before haha

03-02-2008, 08:29 PM	#21
SpooledupRacing Guest Posts: n/a	Thank you sir!!

03-05-2008, 08:50 AM	#22
SpooledupRacing Guest Posts: n/a	Well last night I got my lim cleaned and painted... my crank pulley cleaned and painted.. my water pump housing is cleaned (painting tonight) and I plan to clean the uim tonight... I will get pics tonight of everything done and the process as it unravels..

03-13-2008, 07:10 AM	#24
SpooledupRacing Guest Posts: n/a	The lim is bolted on the exhaust manifold is completly stripped down and ready for high temp paint the upper fuel rail has been painted (red) the turbo was broken apart to clean and paint and I found the exhaust side was cracked inside.. (awaiting a new one) still waiting for a clutch kit and flywheel tonight I will paint the compressor housing (gunmetal) tonight I will paint the lower fuel rail (red) tonight I plan to paint the exhaust manifold (black) tonight I plan to clean the uim and get it prepped for paint next weekend I will send the injectors out to get cleaned and flow tested.

03-13-2008, 08:13 PM	#25
SpooledupRacing Guest Posts: n/a	Time for updates... since last time I have: cleaned and painted the water pump housing cleaned and painted both fuel rails cleaned and painted the thermostat neck pulled the turbo apart (found the exhaust housing is junk) clean and painted the compressor housing mounted the upper intake mounted the upper fuel rail (need to put injectors in of course) put the water pump housing on (awaiting water pump) here are some pictures From a nice neat table to this mess

03-14-2008, 10:25 AM	#26
Willub and Company Rotary Fanatic Join Date: Mar 2008 Location: Massachusetts Posts: 114 Rep Power: 18	looks very nice, make sure you take a video of the start up! __________________ Christian's the name 10AE..BIG turbo and Microtech coming soon!

03-14-2008, 10:56 AM	#27
SpooledupRacing Guest Posts: n/a	OH will do.

03-23-2008, 10:18 AM	#28
SpooledupRacing Guest Posts: n/a	nothing really new to update.. I did however buy my ACT lightweight flywheel yesterday...

03-24-2008, 01:54 PM	#29
SpooledupRacing Guest Posts: n/a	Well ACT's website is wrong.. the flywheel I bought will NOT work on my car so now I am out the time and money in order to get the flywheel and resell it then buy a new one to get the engine installed!!! this is why I HATE ACT!!!!

03-25-2008, 05:15 PM	#30
turbovert91 Rotary Fan in Training Join Date: Mar 2008 Posts: 40 Rep Power: 0	That sucks, you were making good time on the rest of your project, too...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode