new product! carbon hoods for the first gen! pics

730RWHP12A · 03-06-2009, 04:03 PM

--------------------------------------------------------------------------------

The carbon hoods are a 2 piece design that has a carbon top, next, hardware installed(for stock hood hinges and latch) then a liner is installed to make the hood rigid. It's a solid unit that you don't have to worry about it flying off your car the gel coat has UV additive to keep it from discoloring. Adding a few coats of clear is recommended for added protection and a even deeper shine. The weight of the hood is 15 pounds v.s. the stock hood weighing in at 40 pounds.

The fiberglass units don't have hardware so you will need hood pins to attach it to your car. The fiberglass in it does have a hood liner for added strength like the carbon hood. This Hood weighs in at 15 pounds v.s. the stock hood weight of 40 pounds. ****** for an added cost the fiberglass hood can be fitted with the factory mounting hardware*****

730RWHP12A · 03-06-2009, 04:04 PM

more pics

85rx-7gsl-se · 03-06-2009, 04:28 PM

Do I even wanna know what this beauty runs?

730RWHP12A · 03-06-2009, 07:27 PM

the hoods will sell in the $600-$650 range plus a ton for shipping

Whizbang · 03-06-2009, 09:02 PM

so like over 1000 kind of deal? Im surprised no one makes these state side.

730RWHP12A · 03-07-2009, 01:51 PM

i make them locally on socal

Whizbang · 03-07-2009, 02:45 PM

whats the guess on shipping then?

josh18_2k · 03-07-2009, 02:54 PM

wtf

where are the plain carbon hoods for FCs? i dont want a damn TII scoop or some silly vent.

730RWHP12A · 03-07-2009, 08:56 PM

Quote:

Originally Posted by Low Impedance

whats the guess on shipping then?

since these are a new item,shipping prices are unknown. i know usps wont ship them as they are too big, ups scares me because the destroy anything they can. im going to check on freight shipping and see if thats possibility as thats the method i currently use to ship motors/trannys with good results.

staticpat · 03-07-2009, 09:35 PM

How much for fiberglass?

josh18_2k · 03-08-2009, 02:58 AM

maybe some of us cook breakfast in there

730RWHP12A · 03-08-2009, 02:26 PM

Quote:

Originally Posted by staticpat

how much for fiberglass?

$550

03-06-2009, 07:27 PM	#4
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california Posts: 349 Rep Power: 18	the hoods will sell in the $600-$650 range plus a ton for shipping __________________ rotaryshack.com

03-06-2009, 09:02 PM	#5
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	so like over 1000 kind of deal? Im surprised no one makes these state side. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

03-07-2009, 01:51 PM	#6
730RWHP12A Rotary Fanatic Join Date: Mar 2008 Location: chatsworth, california Posts: 349 Rep Power: 18	i make them locally on socal __________________ rotaryshack.com

03-07-2009, 02:45 PM	#7
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	whats the guess on shipping then? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

03-07-2009, 02:54 PM	#8
josh18_2k Rotary Fanatic Join Date: Feb 2008 Location: Gresham, OR Posts: 473 Rep Power: 18	wtf where are the plain carbon hoods for FCs? i dont want a damn TII scoop or some silly vent. __________________

03-07-2009, 09:35 PM	#10
staticpat Rally Fanboy Join Date: Feb 2008 Location: New York Posts: 147 Rep Power: 18	How much for fiberglass? __________________

03-08-2009, 02:58 AM	#11
josh18_2k Rotary Fanatic Join Date: Feb 2008 Location: Gresham, OR Posts: 473 Rep Power: 18	maybe some of us cook breakfast in there __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode