Guru Flywheel

Whizbang · 03-13-2009, 12:20 PM

for now im opting for a OS giken setup off Rob since its more practical, but someone has to be "that guy". Also might keep others from hassling me and wanting to drive it.

Its really all up in the air since i have to figure out some cross compatibility if i opt for the T5. I know the 5.5" clutch setup can easily be found for the 1-1/8" 26 spline GM stuff. OS seems to have a clutch that should work too that was originally meant for the Holinger sequential transmissions. Hell, maybe ill just get both since im sure to have more than one car in due time anyway.

cturbo28 · 07-03-2009, 01:23 PM

The GURU set up looks interesting. I would be worried about replacement parts but that might not be an issue. What are the best sources to buy one?

Black91n/a · 07-06-2009, 11:21 PM

You can get organic disks in 7.25" that would be better for semi-street duty, as you'd gain more modulation over a 5.5" race disk. Another thing to consider, get a flywheel for an NA transmission and use an RX-4 or similiar bellhousing, as I'm told it'll bolt up to a TII transmission and works with the smaller NA flywheel size. Should work with whatever T5 adapter you'd have to use as well. The smaller the flywheel, the less the inertia for a given weight, also, it should be able to be lighter by being smaller.

03-13-2009, 12:20 PM	#1
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	for now im opting for a OS giken setup off Rob since its more practical, but someone has to be "that guy". Also might keep others from hassling me and wanting to drive it. Its really all up in the air since i have to figure out some cross compatibility if i opt for the T5. I know the 5.5" clutch setup can easily be found for the 1-1/8" 26 spline GM stuff. OS seems to have a clutch that should work too that was originally meant for the Holinger sequential transmissions. Hell, maybe ill just get both since im sure to have more than one car in due time anyway. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook Last edited by Whizbang; 03-14-2009 at 08:48 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-03-2009, 01:23 PM	#2
cturbo28 Rotary Fan in Training Join Date: Apr 2009 Posts: 49 Rep Power: 0	The GURU set up looks interesting. I would be worried about replacement parts but that might not be an issue. What are the best sources to buy one?

07-06-2009, 11:21 PM	#3
Black91n/a Rotary Fan in Training Join Date: Mar 2009 Posts: 39 Rep Power: 0	You can get organic disks in 7.25" that would be better for semi-street duty, as you'd gain more modulation over a 5.5" race disk. Another thing to consider, get a flywheel for an NA transmission and use an RX-4 or similiar bellhousing, as I'm told it'll bolt up to a TII transmission and works with the smaller NA flywheel size. Should work with whatever T5 adapter you'd have to use as well. The smaller the flywheel, the less the inertia for a given weight, also, it should be able to be lighter by being smaller.