Cerberus Project - Rotary Car Club

		Rotary Car Club > Tech Discussion > Show your rotary car build up.
Cerberus Project

Mark Forums Read

Show your rotary car build up. Show off your Rotary Car build!

PaperClip

vex Cerberus Project (56K DNE) 07-05-2008, 07:49 PM

vex Here's something to whet your... 07-11-2008, 07:35 AM

WE3RX7 My buddy lives in Culpeper... 07-15-2008, 09:16 PM

vex Oh hey, you found it. lol. I... 07-16-2008, 06:49 AM

WE3RX7 We'll all have to hang out at... 07-17-2008, 08:41 PM

Phoenix7 So is this S4? S5? i ASK... 08-03-2008, 02:30 PM

vex It's an S4. So far my plans... 08-03-2008, 02:57 PM

vex oh yeah... I forgot to post... 08-03-2008, 05:06 PM

vex Christmas came in August this... 08-26-2008, 04:22 PM

vex Well, this weekend's been... 08-30-2008, 02:44 PM

WE3RX7 Suspenseful man! You'll... 08-31-2008, 09:44 PM

vex Actually I am excited to hear... 09-01-2008, 02:39 PM

WE3RX7 You can test the ECU out of... 09-02-2008, 03:37 PM

vex I tested the ECU I was... 09-03-2008, 08:21 AM

vex Just got the RTek back today.... 09-08-2008, 02:20 PM

WE3RX7 TX - not sure I'm following... 09-08-2008, 06:19 PM

TehMonkay TX = send channel on a data... 09-08-2008, 06:32 PM

WE3RX7 Ah - makes sense.... BTW -... 09-08-2008, 07:30 PM

vex It's the Palm I'm using ... 09-08-2008, 10:30 PM

vex Alright the car is going... 09-29-2008, 08:28 PM

WE3RX7 I was beginning to wonder... 09-29-2008, 10:56 PM

vex haha, sorry. I was just... 09-30-2008, 09:44 PM

WE3RX7 Hit me up after this weekend,... 10-01-2008, 03:14 PM

vex Sweet. Will do bro, will do. 10-01-2008, 08:42 PM

vex Alright, basically due to... 11-10-2008, 04:49 PM

WE3RX7 Marriage huh? That'll put a... 11-10-2008, 04:51 PM

vex FD alt rebuild parts, so I'll... 11-10-2008, 05:49 PM

vex Well... it's a new semester... 01-27-2009, 12:00 PM

vex The reason for lack of... 02-11-2009, 08:37 PM

WE3RX7 Pics, or it never happened :)... 02-11-2009, 11:20 PM

vex Come the summer months. I'm... 02-12-2009, 01:02 PM

WE3RX7 Well, in an attempt to move... 02-12-2009, 01:44 PM

vex I'll probably need to pull... 02-12-2009, 03:17 PM

vex well... today I was able to... 02-13-2009, 09:41 PM

WE3RX7 If the coolant seal went, I'd... 02-15-2009, 11:28 PM

vex Well pulled apart the rear... 02-16-2009, 12:52 AM

vex Anyone willing to give me a... 02-16-2009, 03:00 AM

Max777 /\ PM sent! 02-16-2009, 03:07 PM

WE3RX7 yea, that iron is f'd. I... 02-16-2009, 08:49 PM

vex well removed the rear iron... 02-18-2009, 10:06 PM

vex Look what came in the mail... 02-20-2009, 04:25 PM

WE3RX7 I dont get it - big red... 02-20-2009, 04:34 PM

vex Can't, I have no other... 02-20-2009, 04:53 PM

vex Alright, well I inspected the... 02-22-2009, 03:55 PM

vex Well I just ordered a 6PI... 02-25-2009, 12:38 AM

vex Got a few parts that came in... 03-03-2009, 04:23 PM

WE3RX7 Nice! Should be fun... 03-06-2009, 03:36 PM

vex I'm looking forward to it. ... 03-08-2009, 02:40 AM

vex Here's the ported throttle... 03-09-2009, 01:16 AM

TitaniumTT are you going to plug the... 03-09-2009, 12:27 PM

vex Already did with epoxy. I... 03-09-2009, 12:37 PM

vex Did a little more work: ... 03-09-2009, 10:09 PM

TitaniumTT Keep it. 03-10-2009, 05:15 AM

vex Well it's decided then. I'll... 03-10-2009, 09:40 AM

WE3RX7 You'll want the BAC, I know... 03-10-2009, 01:51 PM

vex lol, I just ordered the seals... 03-10-2009, 03:43 PM

vex Got some welding done 03-10-2009, 11:23 PM

TitaniumTT Where did that flex pipe come... 03-11-2009, 11:58 AM

vex The flex pipe is a 6" that... 03-11-2009, 04:01 PM

vex Another day, another time... 03-11-2009, 11:38 PM

TitaniumTT Porting - take your time. ... 03-11-2009, 11:47 PM

vex Well I ported the irons. Did... 03-14-2009, 11:36 PM

vex well engine didn't get put... 03-15-2009, 11:43 PM

vex Well, tried my hand at... 03-21-2009, 09:39 PM

TitaniumTT So should we start an... 03-22-2009, 12:49 AM

vex First time welding. Went for... 03-22-2009, 01:46 AM

WE3RX7 Get some pics up of the bay... 03-23-2009, 10:34 AM

vex I'll do what I can. My... 03-25-2009, 10:25 AM

vex Got to go to the garage today... 03-28-2009, 10:08 PM

Max777 Umm, as far as the orings,... 03-29-2009, 01:19 PM

vex Already installed the Dowel... 03-29-2009, 01:23 PM

WE3RX7 Max was right - the oval one... 03-29-2009, 08:37 PM

Max777 No, the oil pickup tube uses... 03-30-2009, 12:15 AM

vex After much consideration I... 04-01-2009, 10:47 AM

lt1_fd3s these are the pics i was... 04-02-2009, 10:25 AM

WE3RX7 seriously, i would have... 04-01-2009, 12:54 PM

lt1_fd3s I don't see any pics =[ 04-01-2009, 01:09 PM

vex Sorry, I'll take pics next... 04-01-2009, 10:00 PM

TitaniumTT When the keyway is @ 270*, or... 04-02-2009, 08:34 AM

vex Thanks TTT. I didn't know... 04-02-2009, 10:01 AM

vex http://image.corvettefever.com... 04-02-2009, 10:46 AM

lt1_fd3s ^^ sweet!!! haha...ok,... 04-02-2009, 11:19 AM

vex Probably not. I won't even... 04-02-2009, 11:29 AM

WE3RX7 You going to go to DGRR? I'm... 04-02-2009, 09:52 PM

vex no car. My 7 still doesn't... 04-03-2009, 07:27 AM

vex My engine is ready to be put... 04-03-2009, 05:21 PM

vex Engine and tranny and... 04-04-2009, 09:52 PM

WE3RX7 So were you able to get the... 04-05-2009, 09:31 PM

vex For sure. I got the bearing... 04-06-2009, 11:15 AM

WE3RX7 Lots of thought needs to go... 04-06-2009, 03:51 PM

vex I can only keep it as close... 04-06-2009, 04:08 PM

vex Figured I'd get back and... 04-08-2009, 02:42 PM

vex Here's a digital mock up.... 04-08-2009, 07:24 PM

WE3RX7 You can also move the brake... 04-08-2009, 09:20 PM

vex I suppose I could do that. ... 04-08-2009, 09:30 PM

WE3RX7 Yea, schedule 40 is good, but... 04-08-2009, 10:03 PM

vex Just picked up the weld Els... 04-10-2009, 08:17 PM

vex Well, now that I have the... 04-11-2009, 02:15 AM

classicauto Looks very similar to the... 04-11-2009, 01:34 PM

vex Schedule 40 all the way... 04-11-2009, 03:38 PM

Eatmyclutch wow Have fun with yore... 04-11-2009, 06:31 PM

vex Post number 1? lol, there... 04-11-2009, 07:01 PM

classicauto I would run a little smaller... 04-13-2009, 01:02 PM

vex A little too late now though.... 04-13-2009, 01:13 PM

vex Finished welding up the... 04-13-2009, 09:19 PM

vex Pulled a 24 hour shop night. ... 04-16-2009, 02:36 PM

vex Well, here's the pictures. I... 04-16-2009, 06:50 PM

misthael I'm definitely not an expert,... 04-16-2009, 07:59 PM

vex The Joys of Tig. Honestly... 04-16-2009, 09:23 PM

vex Okay, quick update. There... 04-29-2009, 09:10 PM

WE3RX7 Great progress man... ... 04-29-2009, 09:19 PM

vex Pulley's on correctly... but... 04-29-2009, 09:55 PM

WE3RX7 Honestly, I have quite a bit... 04-30-2009, 01:23 PM

vex sweet. Thanks! I would... 04-30-2009, 02:20 PM

vex Had to cut out of the garage... 05-02-2009, 08:46 PM

vex It has started and runs! It... 05-10-2009, 10:17 PM

WE3RX7 This is great man - cant wait... 05-11-2009, 08:57 AM

vex Well, brought her home today... 05-14-2009, 01:15 AM

WE3RX7 Thats awesome man, really... 05-14-2009, 10:55 AM

vex I should be up that way this... 05-14-2009, 06:57 PM

TitaniumTT Looking good man. Great job... 05-14-2009, 10:25 PM

vex Yeah, I like it. The mani... 05-14-2009, 10:55 PM

vex Well, finally got a decent... 05-31-2009, 03:57 PM

TitaniumTT Depends in how many outputs... 05-31-2009, 05:12 PM

vex Right, right, right. But I... 05-31-2009, 08:30 PM

WE3RX7 Haltechs are cheap and... 06-01-2009, 08:08 AM

vex True that, but I don't know... 06-01-2009, 09:21 AM

classicauto ERECTIONmotive is also... 06-01-2009, 09:50 AM

vex Got a link? I can't exactly... 06-01-2009, 12:08 PM

TitaniumTT They have know timing issues... 06-01-2009, 05:28 PM

EJayCe996 I demand a sound clip, I'm... 06-01-2009, 05:51 PM

vex I have almost the exact same... 06-01-2009, 08:34 PM

TitaniumTT :lol: well tonight I cleaned... 06-01-2009, 11:13 PM

vex The only one that I can find... 06-02-2009, 07:35 AM

TitaniumTT 90/25.4" = 3.5" Maybe buy a... 06-02-2009, 08:32 AM

vex too big. Honestly the car... 06-02-2009, 09:20 AM

classicauto Yes, the car chemistry deal... 06-02-2009, 10:06 AM

WE3RX7 I think the exhaust question... 06-02-2009, 02:34 PM

TitaniumTT Out of my league at this... 06-02-2009, 11:46 PM

FC3S Murray I love my Power FC but then... 06-02-2009, 04:00 PM

vex The Haltech Plat 2000 is... 06-08-2009, 01:59 PM

vex Just when I thought I'd have... 06-16-2009, 05:12 PM

vex So WE3RX7 Was able to shadow... 07-23-2009, 03:18 PM

WE3RX7 So this will mean you will... 07-23-2009, 03:48 PM

WE3RX7 Oh and your car must be... 07-23-2009, 03:49 PM

vex Haha, I actually saw you out... 07-24-2009, 12:43 AM

TitaniumTT :suspect: Where are these... 07-24-2009, 08:06 PM

vex won't start/finish them until... 07-25-2009, 10:06 AM

Prev

Previous Post

Next Post

Next

04-01-2009, 10:47 AM	#11
vex RCC Loves Me Not You Join Date: Jul 2008 Location: Influx. Posts: 2,113 Rep Power: 19	After much consideration I have decided to change the way I'm going with this project. I've been able to locate a nice LS9 for not at all that much and have decided that I'm just going to go ahead and drop that motor in instead of my triangle powered monstrosity. I still plan on being done within the next two weeks or so, but we'll see. Anyways here's a few pictures: APRIL FOOLS! __________________ The Official FC Radiator Thread My Project Thread: Cerberus CCVT Virginia Rotary Group

Bookmarks

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 05:16 PM.