Pilot Bearing Removal

josh18_2k · 04-03-2009, 11:28 PM

ohh lol this isnt v8rx7forum..
the grease pack method will probably work best. pack a bunch of grease into the pilot bearing hole, until its good an full. then find a dowel that fits nicely into the hole, and hammer it. if you have the right size dowel, hydrolic pressure will pop the bearing out.

LS1's cant do this cuz theres a freeze plug back there. i highly doubt rotaries have the same problem.

04-03-2009, 11:28 PM	#5
josh18_2k Rotary Fanatic Join Date: Feb 2008 Location: Gresham, OR Posts: 473 Rep Power: 18	ohh lol this isnt v8rx7forum.. the grease pack method will probably work best. pack a bunch of grease into the pilot bearing hole, until its good an full. then find a dowel that fits nicely into the hole, and hammer it. if you have the right size dowel, hydrolic pressure will pop the bearing out. LS1's cant do this cuz theres a freeze plug back there. i highly doubt rotaries have the same problem. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode