Megasquirt Info Thread

Whizbang · 04-04-2009, 02:36 PM

As far a sensors go, there are several ways you go about things. There is plenty of info on the megasquirt web forums related to sensors, but for the Rx7 almost everything is useable. The IAT (intake air temp) sensor will read off by 10 degrees. You can use a resister and figure it back to correct reading, but i just elected to drill and tap for using a GM sensor (which reads true). Mostly because i have an after market manifold and i have to drill and tap for it anyway.

The TPS, coolant temp sensor, etc will all work with the megasquirt.

04-04-2009, 02:36 PM	#2
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	As far a sensors go, there are several ways you go about things. There is plenty of info on the megasquirt web forums related to sensors, but for the Rx7 almost everything is useable. The IAT (intake air temp) sensor will read off by 10 degrees. You can use a resister and figure it back to correct reading, but i just elected to drill and tap for using a GM sensor (which reads true). Mostly because i have an after market manifold and i have to drill and tap for it anyway. The TPS, coolant temp sensor, etc will all work with the megasquirt. __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode