AZRR CYM FD Build Coming Together

[RCCAZ 1]

OK everyone,

Here are some final pics. Finished up the undertray, although I'll probably pull it later next week to get it powdercoated.

Thanks to Tom and Glen from AZRR for riding with me last night to the Scottsdale Pavillions for the Saturday evening car show. Tom rode shotgun with me and datalogged and made adjustments to my map the entire way. With Tom richening up several areas of the map, I now feel that I can safely drive it through the break-in period. Here are some pics from yesterday with the completed engine bay, side skirts installed, new rear diffuser, etc, etc. Thanks again guys!!! The only thing left to install is my WI setup.

On the way to the event, ambient temps were around 84F and my intake air temp was 29C, water temps were between 84 and 86C. Coming home post event, ambient temps had dropped off into the upper 70s with my intake air temp dropping to 26C and water temps in the same range (84-86)