|
|||||||
| RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
 |
|
|
Thread Tools | Display Modes |
|
|||||||
| RX-7 1st Gen Specific (1979-85) RX-7 1979-85 Discussion including performance modifications and technical support sections |
|
|
|
Thread Tools | Display Modes |
|
|
05-12-2009, 12:36 AM
|
#1 |
|
Itchin' to Turbo
Join Date: Apr 2009
Location: Vancouver, WA
Posts: 33
Rep Power: 0  |
Punch and a hammer to collapse it in on itself.
At work I'll weld a bolt to it, and use the slide hammer to pop em out. Just have to be careful not to let the weld puddle wet into the crank. Usually it's pretty tough to weld the crank when you're aiming at something else. Doesn't tend to have enough heat to fuse. Good luck! |
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
