issues need help

TehMonkay · 06-07-2009, 03:25 PM

Try and bump up the idle with the screw on the bac valve, i would turn it all the way in first then slowly back it out until it stays running.

FCTII · 06-07-2009, 05:52 PM

Quote:

Originally Posted by TehMonkay

Try and bump up the idle with the screw on the bac valve, i would turn it all the way in first then slowly back it out until it stays running.

there is no bac valve it was removed before i bought it.

06-07-2009, 03:25 PM	#1
TehMonkay Rotary Fanatic Join Date: Apr 2008 Location: Louisville, KY Posts: 302 Rep Power: 18	Try and bump up the idle with the screw on the bac valve, i would turn it all the way in first then slowly back it out until it stays running. __________________ My car blows up everytime I start it, it's rotary

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode