BHR/SPEC Clutches Released!

Flashwing · 06-16-2009, 02:29 AM

A couple weekends back, the BHR team quarterbacked a Greddy Turbo install for a local Phoenix RX8 owner. The kit was completed with tuning using the COBB accessPORT and tuning was conducted by Jeff Abrams who posts as MazdaManiac.

The kit was completed with some fabrication to incorporate the AEM intake as a substitution to the poorly designed Greddy intake system. Also done was some fabrication to the intercooler mounting to incorporate the AEM cold air intake.

Other substitutions are the HKS Sequential blow off valve in the limited black edition as well as black Samco couplers and vibrant t-bolt clamps!

Here are some pictures!

Inlet and discharge pipes from the turbo

Custom intercooler mount to accommodate the AEM intake

intercooler connected

some pretty cool engine bay shots

06-16-2009, 02:29 AM	#2
Flashwing The Newbie Join Date: Aug 2008 Location: Phoenix, AZ Posts: 27 Rep Power: 0	BHR Installs Azlizrd's Turbo! A couple weekends back, the BHR team quarterbacked a Greddy Turbo install for a local Phoenix RX8 owner. The kit was completed with tuning using the COBB accessPORT and tuning was conducted by Jeff Abrams who posts as MazdaManiac. The kit was completed with some fabrication to incorporate the AEM intake as a substitution to the poorly designed Greddy intake system. Also done was some fabrication to the intercooler mounting to incorporate the AEM cold air intake. Other substitutions are the HKS Sequential blow off valve in the limited black edition as well as black Samco couplers and vibrant t-bolt clamps! Here are some pictures! Inlet and discharge pipes from the turbo Custom intercooler mount to accommodate the AEM intake intercooler connected some pretty cool engine bay shots __________________ Black Halo Racing - We don't sell parts, we solve problems!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode