TitaniumTT's I hope I make it to DGRR '09 Build

***TitaniumTT*** · 06-28-2009, 11:01 PM

The price is something that also causes me "concern." Breaking a set of $280 seals is, not ok but not tragic. If I lost a set of $1800 seals.... I would kill. Actually Kill.

From what I understand,
NRS lowered thier price to about $1,200 for a set of seals and springs
Ceramics give much better compression than steels before being broken in, but I haven't heard anything of what the comp is like after bedding the engine in. Actually, I got very similar results to the ceramics with the last engine I built - ~130psi.
When they do break, the just disintegrate leaving the housing in-tact.

I dunno, maybe I'll try them eventually, but not with this engine. I'm not looking for ridiculous amounts of power from a teeny tiny turbo cranked to 30psi and overheating the shit out of everything.

Meh, I'll talk to Dave when I'm there next.

06-28-2009, 11:01 PM	#11
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	The price is something that also causes me "concern." Breaking a set of $280 seals is, not ok but not tragic. If I lost a set of $1800 seals.... I would kill. Actually Kill. From what I understand, NRS lowered thier price to about $1,200 for a set of seals and springs Ceramics give much better compression than steels before being broken in, but I haven't heard anything of what the comp is like after bedding the engine in. Actually, I got very similar results to the ceramics with the last engine I built - ~130psi. When they do break, the just disintegrate leaving the housing in-tact. I dunno, maybe I'll try them eventually, but not with this engine. I'm not looking for ridiculous amounts of power from a teeny tiny turbo cranked to 30psi and overheating the shit out of everything. Meh, I'll talk to Dave when I'm there next. __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode