Go Back   Rotary Car Club > Tech Discussion > Show your rotary car build up.

Show your rotary car build up. Show off your Rotary Car build!

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-10-2009, 02:46 AM   #6
Rotary#10
Rotorhead
 
Rotary#10's Avatar
 
Join Date: Sep 2008
Location: "the town " Oakland
Posts: 219
Rep Power: 17
Rotary#10 is on a distinguished road
Major Problem #1

mmm waterpump seems to have begun failing; there is a leak some where around the waterpump or the hose is leaking. It all started Sat. afternoon it was pretty hot too, high 80's. Strange garling sound came from the front of the car. I thought I was the pliot bearing but not yet. turns out that sound was from water resvoiur. Sucked it almost empty but I put water in there asap and drove it really slowly and kept eyes on the temp. gauge. It didn't move from its normal position. so I drove it slowly from Hayward to Oakland didn't heat up at all. The pulley on the waterpump shakes and rattles even at idle so I know im going have to swap it from my other rx7.
__________________
Currently running:
90 GTUs converted to S5 TurboII. Track car.
90 N/A GTUs..
Running project car

89 N/A GTUs in Black #2
10/6/18
Blown coolant seal undergoing rebuild and restomod.
Rotary#10 is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:20 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Hosted by www.GotPlacement.com