worth rebuilding my engine?

NoDOHC · 09-13-2009, 10:40 PM

For that matter, I have lots of good S4 injectors, I will bring a set down (but I am guessing that is not the problem, I think it is sensor related). We will check the timing too. (I know all coils are firing, we already tested that). If the engine didn't idle so smoothly, I would be guessing vacuum leak.

Fuel pressure is also a good one (I think I have a gauge somewhere).

It is also possible that I have driven my Haltech '86 so long that I forgot how slowly stock rotaries rev. (although I think the '91 revs faster).

09-13-2009, 10:40 PM	#13
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 17	For that matter, I have lots of good S4 injectors, I will bring a set down (but I am guessing that is not the problem, I think it is sensor related). We will check the timing too. (I know all coils are firing, we already tested that). If the engine didn't idle so smoothly, I would be guessing vacuum leak. Fuel pressure is also a good one (I think I have a gauge somewhere). It is also possible that I have driven my Haltech '86 so long that I forgot how slowly stock rotaries rev. (although I think the '91 revs faster). __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode