can i use a turbo to blow through a holley

jimmys79rx · 09-29-2009, 02:22 AM

ive got the holley carb on my 12a/13b and i was wondering what i would have to do to blow through it, or would i have to pressurize the whole carb,

PercentSevenC · 09-29-2009, 12:03 PM

Sure. Here's a guide:
http://www.hangar18fabrication.com/blowthru.html

NoDOHC · 09-29-2009, 07:20 PM

Actually the only big worry with a turbo is that you can't do a draw through setup and get much life out of the turbo.

The guys in the carburated and old school section should know quite a bit about this too.

09-29-2009, 02:22 AM	#1
jimmys79rx The Newbie Join Date: Jul 2009 Location: ft. walton bch.,fl Posts: 25 Rep Power: 0	can i use a turbo to blow through a holley ive got the holley carb on my 12a/13b and i was wondering what i would have to do to blow through it, or would i have to pressurize the whole carb,

09-29-2009, 07:20 PM	#3
NoDOHC The quest for more torque Join Date: Sep 2008 Location: Sheboygan, Wisconsin Posts: 855 Rep Power: 18	Actually the only big worry with a turbo is that you can't do a draw through setup and get much life out of the turbo. The guys in the carburated and old school section should know quite a bit about this too. __________________ 1986 GXL ('87 4-port NA - Haltech E8, LS2 Coils. Defined Autoworks Headers, Dual 2.5" Exhaust (Dual Superflow, dBX mufflers) 1991 Coupe (KYB AGX Shocks, Eibach lowering springs, RB exhaust, Stock and Automatic)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode