Well after a coupe bearings in the idler pulley TWEAKIT racing changed to the original idlers bearing and all is good now very glad that they stand behind thier work very well i went through 4 bearings free of charge..
As of now finishing the interior is a slow crawl when i get around to it but i decided to quite this car down even more i will be building a 3" inch exhaust to replace the 4" to quite it down and give it more of the 2-stroke brap than the 4" i have now. till then though i have made a quite 3" insert and it works pretty good but kinda nulls the point of a 4" exhaust whixh is why im gonna build a 3" later
heres the 3" silencer
And once again a little inteior fixing..... my glove box handle was broke off but all the tabs and everything in the box is still good and its a 94 so i can take it apart. i made an aluminum handle which works very good shouldnt have to worry about it breaking either
i might give it a finish eventually but you cant see it installed anyway and it works so i will leave it as is for now
heres the handle
connected
might finish it later
10-02-2009, 09:23 PM
Threaded Mode