Re-chromed rotor housings - Page 5

jerd_hambone · 05-15-2011, 02:46 AM

Staying tuned!

My5ABaby · 05-15-2011, 10:43 AM

Very tuned.

glassman · 06-08-2011, 10:29 AM

A bit more machine work then some welding and we should be good to go.

My5ABaby · 06-08-2011, 12:37 PM

Quote:

Originally Posted by glassman

A bit more machine work then some welding and we should be good to go.

If you were a chick I'd call you a cock tease...

glassman · 07-30-2011, 12:09 AM

Quote:

Originally Posted by My5ABaby

If you were a chick I'd call you a cock tease...

Hahaha, here's another tease. We are trying to futher simplify things so that changes are super fast and easy. This means rethinking things somewhat but it makes machining simpler too. I am a real big fan of simplicity.

Also we should have the ablilty to chrome 8 housings at a time once the 2 housing set-up is finalised and working.

13x · 06-08-2011, 09:35 PM

am so waiting to hear progress, I love driving my car and main reason I don't drive her daily is the fact that 12A housings are no longer readily available and I have 4 first gens including my sons back East

It does not appear to be an easy road you've embarked on but does appear there is a light at the end of the tunnel, keep fighting the good fight

-xlr8planet- · 07-30-2011, 01:50 PM

Im stocking 12a housings waiting for this to happen

glassman · 09-01-2011, 09:12 AM

Well I've been very busy and haven't had time to work on this. Holiday's are starting now so we will pick this up once I'm back.

glassman · 11-01-2011, 11:40 AM

Well we just dumped another $3000 into this. Have some parts in the machine shop now and should be done early next week. Shops are very busy here so it's tough to get anything done. We still have some welding to do and sort out other small issues but that shouldn't take too long. We'll do my FD housings first to make sure everything is working good.

Justen · 11-01-2011, 05:49 PM

subscribed

glassman · 12-04-2011, 03:18 AM

Well all the machining is now done. We've done a mock-up of a pair of housings and all looks really good. Next week we'll get to some welding and round up some other misc parts needed. This thing will be off the ground this month barring any setbacks or problems. Don't for see any problems though as everything is really well designed.

Whizbang · 12-04-2011, 04:55 AM

whats the guessimate cost for this service?

glassman · 12-04-2011, 12:39 PM

We don't have that nailed yet but we're hoping for half of new

Sm1nts2escape · 12-26-2011, 07:47 PM

When do you think you will be able to perform this service to the public for the rew? I am getting ready to rebuild my motor.

glassman · 12-27-2011, 02:25 AM

Should be really soon, we're just about finished

05-15-2011, 10:43 AM	#2
My5ABaby Sigh..... Join Date: Feb 2008 Location: Murfreesboro, TN Posts: 2,377 Rep Power: 20	Very tuned. __________________ 1986 Sport: 132k miles, 5A (Sapphire Blue Metallic), Tokico Blues, Racing Beat Springs, Custom LED tailights (only S4 LED tails in the world), SSR Mark II, Racing Beat exhaust, S5 black interior, Rotary Resurrection rebuild at 120k miles Community Service Manual RotorWiki "Imagination costs nothing; we could build square locomotives or fly to Mars" - Felix Wankel Yesterday is history, tomorrow is a mystery, but today is a gift. That is why it is called the "present."

06-08-2011, 10:29 AM	#3
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	A bit more machine work then some welding and we should be good to go. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

06-08-2011, 09:35 PM	#6
13x SinCityRotary Join Date: Feb 2010 Location: Sin City Posts: 207 Rep Power: 16	am so waiting to hear progress, I love driving my car and main reason I don't drive her daily is the fact that 12A housings are no longer readily available and I have 4 first gens including my sons back East It does not appear to be an easy road you've embarked on but does appear there is a light at the end of the tunnel, keep fighting the good fight __________________ WHiV8 in the works!! May 2015 Email

07-30-2011, 01:50 PM	#7
-xlr8planet- RCC Contributor Join Date: Feb 2008 Location: Buenos Aires, Argentina Posts: 679 Rep Power: 18	Im stocking 12a housings waiting for this to happen __________________ www.rx7club.com.ar RX-7 Forum in Spanish I make custom decals. Yes, you can ask me

09-01-2011, 09:12 AM	#8
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Well I've been very busy and haven't had time to work on this. Holiday's are starting now so we will pick this up once I'm back. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

11-01-2011, 11:40 AM	#9
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Well we just dumped another $3000 into this. Have some parts in the machine shop now and should be done early next week. Shops are very busy here so it's tough to get anything done. We still have some welding to do and sort out other small issues but that shouldn't take too long. We'll do my FD housings first to make sure everything is working good. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

11-01-2011, 05:49 PM	#10
Justen In Too Deep Join Date: Jun 2009 Location: Clifton, NJ Posts: 112 Rep Power: 17	subscribed __________________ 1990 TII, fresh rebuild Atkins rebuild kit, RA apex seals Med. Streetport, TB mod, rebuilt turbo, ported wastegate, GodSpeed FMIC RacingBeat Turbo-back straight exhaust, Bonez test pipe, emissions/nest removed hks intake, Walbro, Profec B spec-2

12-04-2011, 03:18 AM	#11
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Well all the machining is now done. We've done a mock-up of a pair of housings and all looks really good. Next week we'll get to some welding and round up some other misc parts needed. This thing will be off the ground this month barring any setbacks or problems. Don't for see any problems though as everything is really well designed. __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

12-04-2011, 04:55 AM	#12
Whizbang Respecognize! Join Date: Jul 2008 Location: Δx = ħ/2Δp Posts: 3,190 Rep Power: 21	whats the guessimate cost for this service? __________________ For current updates and event coverage check out Follow on Twitter! @WhizbangRally Whizbang Rally's Webpage \| Facebook

12-04-2011, 12:39 PM	#13
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	We don't have that nailed yet but we're hoping for half of new __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

12-26-2011, 07:47 PM	#14
Sm1nts2escape The Newbie Join Date: Aug 2010 Posts: 8 Rep Power: 0	When do you think you will be able to perform this service to the public for the rew? I am getting ready to rebuild my motor.

12-27-2011, 02:25 AM	#15
glassman Premium Vendor Join Date: Apr 2008 Location: Canada Posts: 173 Rep Power: 18	Should be really soon, we're just about finished __________________ Mild to wild, street to strip, when you want to go fast and you want your engine to last, NRS Ceramics is the only way to go. NRS Rotorsports nrsrotorsports@shaw.ca www.nrsrotorsports.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode