Diary of a Madman; TitaniumTT's see you @ DGRRXI RE-REbuild - Page 23

project86 · 05-21-2010, 06:11 AM

Quote:

Originally Posted by FC3S Murray

Good progress Brian! Man it seems that slow FC work has been the pace for everyone this last month....I have only got 500 miles on the FC and barely any tuning done.

I am very impressed with Motec as well.....they really seem to hook there customers up indeed! I would have gone that route if I would have known about Motecs capabilities.

MAN I NEVER THOUGHT I WOULD SEE A PIC OF YOU SLEEPING.......................................... .........here is what you would really look like if you had your "perks" available that night lol

BWAHHAHAHA!! Man those fuel rails are nice and those injectors are siiiiick!

***TitaniumTT*** · 05-21-2010, 08:08 AM

Quote:

Originally Posted by WE3RX7

Bah... slacker.

You think you've done shit. I've had nothing short of wrapping up some interior stuff and jacking my car up in the last few weeks!

Looking good though - I love the fuel configuration! Must look into those injectors as well... when the time is right of course

I've done less than that in the last 4 weeks. Although now that the car is here I'm getting about 90 minutes a night done, which I guess is better than nothing.

Look into the rails as well. Nicest I've seen. Still plan on working with CJ to make a secondary as there are a few things that I would like to change.... as always.

Quote:

Originally Posted by FC3S Murray

Good progress Brian! Man it seems that slow FC work has been the pace for everyone this last month....I have only got 500 miles on the FC and barely any tuning done.

Damn Sean, break that fucker in already before I fly out there and do it for you..... or you can send her here and I can have 4 RX7's in my driveway

Quote:

Originally Posted by FC3S Murray

I am very impressed with Motec as well.....they really seem to hook there customers up indeed! I would have gone that route if I would have known about Motecs capabilities.

Most people don't, it's kind of surprising. Alot of people just follow the bandwagon but when they see what it can do, they all do the

routine. I think alot of people are scared off by the price as well. It's not cheap, but for what you get, including the support, it really is priceless. I'll never go another route on any of my personal cars.

Quote:

Originally Posted by FC3S Murray

MAN I NEVER THOUGHT I WOULD SEE A PIC OF YOU SLEEPING.......................................... .........here is what you would really look like if you had your "perks" available that night lol
[IMG]http://i721.photobucket.com/albums/ww213/FC3SMurray/redbull.jpg[

ppfffffffttt haahahaahahahaahaha. Yeah, that was a little 4 hr nap @ about 6 in the morning if memory serves.

Quote:

Originally Posted by project86

BWAHHAHAHA!! Man those fuel rails are nice and those injectors are siiiiick!

Yeah, I really can't wait to see what they do for idle, driveability, the map, everything. I called MoTeC one morning to ask a question and I got transferred to one of thier engineers. Guy sounded to be late 40's, incredridbly well spoken, very prim and proper. The he asks what injectors I'm using, I tell him Paul Yaw's Injector Dynamics.... he pauses for a breif moment and says. "Pauls injectors are the SHIT!" I laughed, he went on a 90 second tyraid abour how awesome they are, they're really the only injectors they rec now, they're this, they're that they're just the SHIT! Brian's excited, those Delphi's left me wanting.

project86 · 05-21-2010, 01:27 PM

hmm... youre putting more ideas in my head.....damn

***TitaniumTT*** · 05-21-2010, 09:31 PM

I'm telling ya man.............

actually I'll tell ya in PM to keep the secret a mystery

EJayCe996 · 05-21-2010, 09:52 PM

My friend is running 4 of those ID injectors on his 13b-RE since there's a few vids of bone stock 4 bangers idling/running on them without a hitch. Of course he's also full bridge with GT45 turbo and intends on running E85 in the near future so......

***TitaniumTT*** · 05-24-2010, 10:40 PM

Quote:

Originally Posted by EJayCe996

My friend is running 4 of those ID injectors on his 13b-RE since there's a few vids of bone stock 4 bangers idling/running on them without a hitch. Of course he's also full bridge with GT45 turbo and intends on running E85 in the near future so......

Nice. What did he do for a fuel rail and how did he punch up the diam from 14 to 16?

So I guess it's about time for an update of sorts. I pulled another all nighter just to try to stay on sched.

I've taken the interior as far as I can go until I get the fuel cell done. I really just wanted to show off the redline goods boots and new shifter. A little work on the engine and she's now ready to fire, as soon as I finish up this bitch.....

Here's almost all of the needed pieces.

Getting that top on and tacked in place was without a doubt the hardest thing to do. In taking as many measurementsas possible I found out that everything was off by about .063" May not sound like alot but when it's half the thickness if the material being used, it becomes a rather large problem
Surge tank welded in place

Baffled. You can see the plate I built out of .25" AL with some 1/4-20 bolts for studs. Should be able to get enough loud on those fuckers to knock out any leaks.
The thing holds about a gallon of gas, shouldnever have an issue, or so I hope.

With any luck I'll have the car running by memorial day.... I hope.

EJayCe996 · 05-25-2010, 03:51 PM

Quote:

Originally Posted by TitaniumTT

Nice. What did he do for a fuel rail and how did he punch up the diam from 14 to 16?

I believe he has KG rails, and the 2nd part he didn't mention anything. I haven't seen his car/setup since he got in his M&W ignition/injectors

project86 · 05-25-2010, 12:14 AM

^^As always.. impressed by your work. Are we sure you arent a robot? The welds on that damn fuel cell are fantastic!

Oh and i dont know if you remember this or not but when i told you i sprayed my paint at 29psi to the cap, i meant 29psi to the gun. That i believe translates to 10psi to the cap. I was just thinkin about that the other day while i was at the paint store looking at guns.

helghast7 · 05-25-2010, 06:01 PM

alright just scheduled myself in for a tune!! im excited

btw anyone know where i can get a new dashpot? mines dead in the water

***TitaniumTT*** · 05-27-2010, 10:34 PM

Quote:

Originally Posted by project86

^^As always.. impressed by your work. Are we sure you arent a robot? The welds on that damn fuel cell are fantastic!

Thanks man, I was pretty much a robot at that point, the sun was coming up when I was doing that welding

Quote:

Originally Posted by project86

Oh and i dont know if you remember this or not but when i told you i sprayed my paint at 29psi to the cap, i meant 29psi to the gun. That i believe translates to 10psi to the cap. I was just thinkin about that the other day while i was at the paint store looking at guns.

Cool, thanks. I generally run a little more pressure than that esp with the clear. Are you reducing the clear at all to make it lay that flat?

Quote:

Originally Posted by EJayCe996

I believe he has KG rails, and the 2nd part he didn't mention anything. I haven't seen his car/setup since he got in his M&W ignition/injectors

I've never been overly impressed with the KG rails, then again, I've never been impressed with really any of the aftmkt rails with the exception of one.

He probably just used a bigger o-ring. I was sternly warned about that especially with a boosted engine. I like the Guru rail mainly becuase it has the adapter buckets.

Quote:

Originally Posted by helghast7

alright just scheduled myself in for a tune!! im excited

Sweet! I got myself a date with Dave as well...... now you guys just need to get to OCC.

Quote:

Originally Posted by helghast7

btw anyone know where i can get a new dashpot? mines dead in the water

That's a good question. I don't think anyone would part with one of those if they're trying to sell a TB. you MAY have to get a whole new/used TB.

What about that Rotary Works TB? Seriously

helghast7 · 05-28-2010, 01:51 AM

its a thought, im really trying(other then the tune and my splurge on the tail lights lol) not to spend any money for a while on the car, need to save for a beater for the winter because theres no way in hell im driving the fd with any kind of snow on the ground

i think dave said mazda sells them seperate...i guess it would be a good idea to call them lol, darn my laziness at times haha

RICE RACING · 06-11-2010, 11:00 PM

What an unreal thread

Only skimmed through a few pages, will take some time to look over all of it. Keep up the excellent work.

MaczPayne · 05-28-2010, 02:05 AM

That's a beautiful fuel cell!

***TitaniumTT*** · 05-28-2010, 05:24 AM

Quote:

Originally Posted by helghast7

its a thought, im really trying(other then the tune and my splurge on the tail lights lol) not to spend any money for a while on the car, need to save for a beater for the winter because theres no way in hell im driving the fd with any kind of snow on the ground

i think dave said mazda sells them seperate...i guess it would be a good idea to call them lol, darn my laziness at times haha

I can't remember what that is. I just finished another allnighter, now it's off to a few side jobs before a 10 hr work day.... YAY!!!!!

Quote:

Originally Posted by MaczPayne

That's a beautiful fuel cell!

Thanks Johnson, it'll be even more beautiful if it works

EJayCe996 · 05-28-2010, 10:32 AM

Quote:

Originally Posted by TitaniumTT

Thanks Johnson, it'll be even more beautiful if it works

You're TTT...
1. You're always right
2. Fucking always.
3. You never sleep, you just wait with your eyes closed.
4. Everything works
5. Fucking always.
6. You're not an angry person.
*7. You WILL stab someone.

05-21-2010, 01:27 PM	#3
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	hmm... youre putting more ideas in my head.....damn __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

05-21-2010, 09:31 PM	#4
*TitaniumTT* Test Whore - Admin Join Date: Mar 2008 Location: Right Behind you son Posts: 4,581 Rep Power: 10	I'm telling ya man............. actually I'll tell ya in PM to keep the secret a mystery __________________ -The Angry Stig- DGRR 2009, 2011, 2012 & 2013 - Best FC DEALS GAP!! WOOHOOOO!!!!! 2015 Audi S4 - Samantha - Zero Brap S4 2004 RX8 - Jocelyn - 196rwhp, 19mpg fuel to noise converter 2000 Jeep Cherokee Sport - Wifey mobile - Now with 2.5" OME lift and 30" BFG AT KO's! So it begins 1998 Jeep Cherokee - 5 spd, 4" lift, 33" BFG's - Rotary Tow Vehicle 1988 'Vert - In progress 1988 FC Coupe - Gretchen -The attention whore BEAST! I'm a sick individual, what's wrong with you? I'm pure Evil I'm still insane, in the best possible way. I think Brian's idea of romance is using lube. Your rage caused the meteor strike in Russia. The Antichrist would be proud of his minion. You win with your thread. Most everything It's a truck with a steel gate on the back. Just a statement of fact Motec M820, AIM dash, ported 13B-RE Cosmo, 6-spd trans, 4.3 Torsen, custom twin wg fully divided mani, Custom 4" split into 2x 3" exhaust, Custom HMIC, Custom custom custom custom I like to welder stuff.... No Bolt-ons allowed. Dyno'ed @ Speed1 Tuned by me - 405rwhp on WG.... WM50 cuming soon. *-Angry Motherfcker Mode ENGAGED-**

05-21-2010, 09:52 PM	#5
EJayCe996 PPP-P-P-P-POWER! Join Date: Feb 2008 Location: North GP, TX Posts: 283 Rep Power: 18	My friend is running 4 of those ID injectors on his 13b-RE since there's a few vids of bone stock 4 bangers idling/running on them without a hitch. Of course he's also full bridge with GT45 turbo and intends on running E85 in the near future so...... __________________ 1. Walk through a row of 22", or larger, rims 2. Say you love dubstep 3. ????? 4. PROFIT! Axiomatic: Total cacology.

05-25-2010, 12:14 AM	#8
project86 Can't.Make.Up.My.Mind. Join Date: May 2009 Location: Murfreesboro, TN Posts: 1,377 Rep Power: 18	^^As always.. impressed by your work. Are we sure you arent a robot? The welds on that damn fuel cell are fantastic! Oh and i dont know if you remember this or not but when i told you i sprayed my paint at 29psi to the cap, i meant 29psi to the gun. That i believe translates to 10psi to the cap. I was just thinkin about that the other day while i was at the paint store looking at guns. __________________ '90 GTUs Stay up to date with my photography '06 Toyota Highlander Hybrid '10 Toyota Prius "Initial Success or Total Failure"

05-25-2010, 06:01 PM	#9
helghast7 F yo couch! Join Date: Dec 2009 Location: Belleville, NJ Posts: 223 Rep Power: 16	alright just scheduled myself in for a tune!! im excited btw anyone know where i can get a new dashpot? mines dead in the water __________________ 87' n/a FC 94' FD-360whp, 300lbs-tq at 14psi on twins 92' ZZR-600 sold 07' CBR600RR more to come

05-28-2010, 01:51 AM	#11
helghast7 F yo couch! Join Date: Dec 2009 Location: Belleville, NJ Posts: 223 Rep Power: 16	its a thought, im really trying(other then the tune and my splurge on the tail lights lol) not to spend any money for a while on the car, need to save for a beater for the winter because theres no way in hell im driving the fd with any kind of snow on the ground i think dave said mazda sells them seperate...i guess it would be a good idea to call them lol, darn my laziness at times haha __________________ 87' n/a FC 94' FD-360whp, 300lbs-tq at 14psi on twins 92' ZZR-600 sold 07' CBR600RR more to come

06-11-2010, 11:00 PM	#12
RICE RACING Don Mega Join Date: Dec 2008 Location: Utopia Posts: 1,688 Rep Power: 18	What an unreal thread Only skimmed through a few pages, will take some time to look over all of it. Keep up the excellent work. __________________ www.riceracing.com.au Worlds best Apex Seals Coil on Plug Water Injection ECU Calibration

05-28-2010, 02:05 AM	#13
MaczPayne Bah! Join Date: Mar 2008 Location: Riverside, SoCal Posts: 442 Rep Power: 18	That's a beautiful fuel cell! __________________ Johnson TA FC in the works!