New 20b intake plenum and runners

gmonsen · 02-02-2011, 12:50 AM

Victor is working thorough the night to get these done. They are made up in halves and welded together. That's the only way we could get the complex curves and tapering to work just right. Please don't mind the welds. They will not be visible once ground and polished and then painted.

Gordon

Look at the curves and taper of the runners. Very complex shape.

Notice how different the lengths of the runners were originally. The third rotor has a much longer runner than the others.

02-02-2011, 12:50 AM	#1
gmonsen The Ancient One Join Date: Mar 2008 Location: Eastern Pennsylvania Posts: 144 Rep Power: 18	Victor is working thorough the night to get these done. They are made up in halves and welded together. That's the only way we could get the complex curves and tapering to work just right. Please don't mind the welds. They will not be visible once ground and polished and then painted. Gordon Look at the curves and taper of the runners. Very complex shape. Notice how different the lengths of the runners were originally. The third rotor has a much longer runner than the others. __________________ 1993 Rx7 R1 20b NA 1994 Rx7 20b supercharged project 1991 BMW 850 6 speed 1991 BMW E30 M3 Evo II